Difficulty: Mixed
Which tool is designed to drive nails?
A Adjustable wrench
B Spirit level
C Tape measure
D Claw hammer
Answer: D. Claw hammer. A hammer is used to drive nails and strike suitable materials.
What does a spirit level check?
A Wood moisture
B Paint thickness
C Wire voltage
D Surface level or plumb
Answer: D. Surface level or plumb. A spirit level checks whether a surface is level or vertical.
Which tool measures short linear distances?
A Pliers
B Tape measure
C Utility knife
D Chisel
Answer: B. Tape measure. A tape measure is used to measure length and distance.
Why choose a screwdriver tip matching the screw?
A Increase screw length
B Change screw material
C Make the screw softer
D Reduce slipping and damage
Answer: D. Reduce slipping and damage. The correct driver tip fits the fastener and reduces cam-out or damage.
Which tool grips and turns hex nuts?
A Hammer
B Wrench
C Handsaw
D Paint scraper
Answer: B. Wrench. A wrench is designed to grip and turn nuts and bolts.
What is a common use of pliers?
A Measure room width
B Check vertical alignment
C Drive finish nails
D Grip or bend material
Answer: D. Grip or bend material. Pliers are used to grip, hold, or bend suitable materials.
Which tool cuts thin sheet material by hand?
A Spirit level
B Tin snips
C Claw hammer
D Tape measure
Answer: B. Tin snips. Tin snips are designed for cutting sheet metal.
How should a hand saw be selected?
A Choose by handle colour
B Match material and cut
C Use one for every material
D Ignore the blade
Answer: B. Match material and cut. Different saws and teeth suit different materials and cuts.
What is a utility knife commonly used for?
A Driving large nails
B Controlled light-duty cutting
C Testing live wires
D Measuring angles
Answer: B. Controlled light-duty cutting. A utility knife can cut suitable thin materials when handled with care.
What should happen before changing a utility knife blade?
A Leave it exposed
B Retract it and follow instructions
C Hold the blade edge
D Use damaged pliers
Answer: B. Retract it and follow instructions. Follow the manufacturer’s instructions and keep the blade retracted while changing it.
Which tool smooths rough wood surfaces?
A Pipe wrench
B Hand plane
C Tape measure
D Screwdriver
Answer: B. Hand plane. A hand plane removes thin shavings to smooth or shape wood.
What can a file do to an edge?
A Measure its weight
B Drive a screw
C Check wall level
D Smooth or shape it
Answer: D. Smooth or shape it. Files shape or smooth material by removing small amounts.
Which tool helps hold a workpiece steady?
A Pencil
B Clamp
C Ruler
D Paint tray
Answer: B. Clamp. A clamp secures material so it does not move during work.
Why should material be clamped before sawing?
A Make the blade sharper
B Change the cut length
C Remove safety glasses
D Keep hands away from blade
Answer: D. Keep hands away from blade. Clamping stabilises the workpiece and frees hands to control the saw.
What does a try square help check?
A Room temperature
B Water pressure
C Paint colour
D Right angles
Answer: D. Right angles. A try square checks whether edges or corners are at right angles.
Which tool marks a straight line before cutting?
A Pliers
B Pipe wrench
C Hammer
D Straightedge
Answer: D. Straightedge. A straightedge guides a straight mark or line.
How should a chisel be directed while trimming wood?
A Toward the free hand
B Away from the body
C Across the palm
D Toward a helper
Answer: B. Away from the body. Direct sharp tools away from the body and keep hands clear of the cutting path.
What should be inspected on a hammer before use?
A Paint colour
B Head and handle security
C Nail length
D Room lighting
Answer: B. Head and handle security. Check that the head is securely attached and the handle is not cracked.
Which screwdriver handle is safest to use?
A Oil-covered and loose
B Cracked and slippery
C Bent and sharp
D Intact and clean
Answer: D. Intact and clean. A clean, intact handle improves grip and reduces slipping.
Why should damaged hand tools be removed from use?
A They become lighter
B They can fail or injure
C They sharpen themselves
D They need less force
Answer: B. They can fail or injure. Cracked, bent, or loose tools can fail unexpectedly and cause injuries.
Which wrench avoids rounding a nut more often?
A Oversized wrench
B Correctly sized wrench
C Loose pipe wrench
D Unrelated pliers
Answer: B. Correctly sized wrench. A correctly sized wrench fits the fastener and reduces slipping or rounding.
What should be done if a wrench slips repeatedly?
A Pull harder
B Add oil to the floor
C Use it as a hammer
D Stop and reassess the fit
Answer: D. Stop and reassess the fit. Stop and check tool size, condition, and fastener fit instead of forcing it.
What can an adjustable wrench jaw be used for?
A Measuring wire voltage
B Cutting plastic pipe
C Checking vertical walls
D Different fastener sizes
Answer: D. Different fastener sizes. An adjustable wrench jaw can fit a range of fastener sizes.
How should a pipe wrench be used?
A On delicate screws
B To drive nails
C To measure level
D On suitable pipe fittings
Answer: D. On suitable pipe fittings. A pipe wrench grips suitable pipes and fittings; it can damage delicate fasteners.
Which hand tool can strip insulation from wire?
A Claw hammer
B Wire stripper
C Wood chisel
D Putty knife
Answer: B. Wire stripper. A wire stripper removes insulation from wire; electrical work should be handled safely by qualified people.
Why avoid using a screwdriver as a pry bar?
A It becomes magnetic
B It measures pressure
C It may break or slip
D It sharpens screws
Answer: C. It may break or slip. Screwdrivers are designed for driving screws; prying can damage them or cause slipping.
What does a stud finder help locate?
A Wall framing or services
B Paint colours
C Floor slope
D Water temperature
Answer: A. Wall framing or services. A stud finder can locate framing and some hidden services, depending on its capability.
Which tool can locate a small wall nail?
A Pipe wrench
B Tin snips
C Magnetic stud finder
D Hand plane
Answer: C. Magnetic stud finder. A magnetic stud finder can detect metal fasteners in some wall assemblies.
How can a tape measure be kept in good condition?
A Retract the blade carefully
B Let it snap back
C Cut its hook off
D Store it wet
Answer: A. Retract the blade carefully. Controlled retraction helps prevent blade damage and hand injuries.
What should be done with a tape measure’s sharp edge?
A Grip the edge
B Use it to scrape
C Keep fingers clear
D Bend it sharply
Answer: C. Keep fingers clear. Keep fingers clear of the metal blade edge and hook.
Which tool can mark a line on wood?
A Carpenter pencil
B Adjustable wrench
C Pliers
D Claw hammer
Answer: A. Carpenter pencil. A carpenter pencil marks cut or layout lines on wood.
Why use a non-slip grip on hand tools?
A Increase tool weight
B Change the blade size
C Improve control
D Replace eye protection
Answer: C. Improve control. A secure grip improves control and reduces accidental slipping.
What can reduce hand strain during repeated work?
A Use a suitable handle
B Grip as hard as possible
C Twist the wrist repeatedly
D Use a damaged tool
Answer: A. Use a suitable handle. A well-sized handle and neutral wrist position can reduce unnecessary force and strain.
Which action is unsafe with a sharp chisel?
A Use a suitable mallet
B Keep hands clear
C Leave it loose
D Store it covered
Answer: C. Leave it loose. Loose sharp tools can injure someone; store them securely.
How should sharp hand tools be stored?
A Covered and secured
B Loose in a drawer
C On a stair
D Within children’s reach
Answer: A. Covered and secured. Secure sharp tools so edges are covered and children cannot access them.
Which protective item may help during cutting tasks?
A Loose scarf
B Open sandals
C Safety glasses
D Dangling bracelet
Answer: C. Safety glasses. Safety glasses help protect eyes from chips and debris.
Why keep tool handles free of grease?
A Improve grip and control
B Change the tool’s length
C Make it cut faster
D Reduce its weight
Answer: A. Improve grip and control. Clean, dry handles are easier to hold securely.
What should be done with a mushroomed chisel head?
A Strike it harder
B Use it as a punch
C Stop using it and repair
D Cover it with cloth
Answer: C. Stop using it and repair. A damaged or mushroomed striking head can shed fragments and should be serviced or replaced.
Which item is intended to cut wood by hand?
A Handsaw
B Level
C Wrench
D Pliers
Answer: A. Handsaw. A handsaw cuts wood when used with suitable technique and a secured workpiece.
What helps protect the hand when using a scraper?
A Push toward the palm
B Use a loose grip
C Keep fingers behind edge
D Remove its handle
Answer: C. Keep fingers behind edge. Keep hands behind the working edge and use the tool as designed.
Which tool can remove old paint from a surface?
A Paint scraper
B Pliers
C Spirit level
D Screwdriver
Answer: A. Paint scraper. A paint scraper can remove loose paint; older coatings may need hazard checks first.
Why should old coatings be assessed before scraping?
A Scrapers create protein
B Paint changes tool size
C Hazardous materials may be present
D All coatings are harmless
Answer: C. Hazardous materials may be present. Older coatings may contain hazardous materials; seek testing or expert guidance when uncertain.
Which hand tool can tighten a slotted screw?
A Flat-head screwdriver
B Torx driver
C Claw hammer
D Pipe wrench
Answer: A. Flat-head screwdriver. A flat-head screwdriver fits a slotted screw head.
What is a Torx driver designed to fit?
A Square nut
B Round nail head
C Star-shaped screw recess
D Flat chisel
Answer: C. Star-shaped screw recess. A Torx driver fits a star-shaped screw recess.
How should a small workpiece be held while cutting?
A Secure it with a clamp
B Hold near the blade
C Rest it on a knee
D Ask a child
Answer: A. Secure it with a clamp. Use a clamp or suitable vice to secure small workpieces.
Which option describes a safer hand-tool workspace?
A Wet and cluttered
B Dark with loose cords
C Clear, dry, well lit
D Crowded by children
Answer: C. Clear, dry, well lit. A clear, dry, well-lit area supports safer tool use.
What should someone do if unsure which hand tool fits?
A Check the manual or ask
B Guess and force it
C Use the sharpest tool
D Borrow damaged pliers
Answer: A. Check the manual or ask. Check instructions or seek experienced guidance instead of forcing an unsuitable tool.
Which tool can measure an angle?
A Claw hammer
B Pipe wrench
C Combination square
D Pliers
Answer: C. Combination square. A combination square can check or mark right angles and some measurements.
Why are extension handles not suitable for every wrench?
A Excess force can damage parts
B They reduce handle length
C They sharpen jaws
D They measure voltage
Answer: A. Excess force can damage parts. Adding leverage can overload a fastener or tool and cause sudden failure.
What is a good habit after hand-tool use?
A Clean and store securely
B Leave tools on stairs
C Keep blades exposed
D Store them wet
Answer: A. Clean and store securely. Clean and store tools securely to protect users and preserve tool condition.