Difficulty: Hard
A parcel cools and becomes saltier at constant pressure. What happens to its density?
A It decreases
B It stays constant
C It increases
D It becomes zero
Answer: C. It increases. Both cooling and salinity increase tend to raise seawater density.
A warm, salty surface parcel overlies cold, fresh water. Which can be concluded?
A Density needs both values
B The top is always denser
C The bottom is always denser
D Both densities are equal
Answer: A. Density needs both values. Temperature and salinity act in opposite directions, so values are needed.
Why compare potential density instead of raw deep-water density?
A It removes salinity
B It measures wave speed
C It ignores temperature
D It corrects pressure compression
Answer: D. It corrects pressure compression. Potential density removes the direct compression effect of pressure for comparison.
A stable pycnocline separates surface and deep waters. What may be reduced?
A Tidal range
B Vertical exchange
C Seafloor spreading
D Solar heating
Answer: B. Vertical exchange. A strong density gradient can restrict vertical mixing between layers.
Sea ice rejects salt into water below. What circulation step may follow?
A Dense water sinking
B Surface evaporation
C Coastal upwelling
D Wave breaking
Answer: A. Dense water sinking. The saltier underlying water becomes denser and may sink to depth.
Which profile best suggests a strongly stratified ocean?
A Density stays uniform
B Salinity is absent
C Density rises sharply
D Pressure falls downward
Answer: C. Density rises sharply. A sharp density gradient indicates strong stratification.
Two parcels have equal density but different temperatures. What must differ?
A Their depths are equal
B Another property offsets
C Their pressures vanish
D Their salinity is absent
Answer: B. Another property offsets. A difference in salinity can compensate for a temperature difference.
Why does a fresh surface cap suppress deep convection?
A It is very salty
B It is highly compressed
C It is always colder
D It is buoyant
Answer: D. It is buoyant. Low-salinity surface water is buoyant and resists sinking.
A deep CTD reading has high pressure. Which density value aids water-mass comparison?
A Potential density
B Apparent depth
C Wave density
D Surface salinity
Answer: A. Potential density. Potential density accounts for pressure compression when comparing water parcels.
What drives the sinking branch of thermohaline circulation?
A Warm foam layers
B Dense surface water
C Coastal tides alone
D River discharge
Answer: B. Dense surface water. Cooling and salt enrichment can create dense water that sinks.
Why does meltwater often strengthen upper-ocean layering?
A It adds deep salt
B It raises bottom heat
C It freshens the surface
D It increases pressure
Answer: C. It freshens the surface. Fresh meltwater lowers surface density and reinforces stratification.
Which paired measurements allow a seawater density estimate?
A Pressure and color
B Wind and waves
C Depth and oxygen
D Temperature and salinity
Answer: D. Temperature and salinity. Temperature and salinity determine the main density contrasts in seawater.
What happens when dense brine intrudes into lighter water?
A It tends to rise
B It tends to descend
C It evaporates instantly
D It stops mixing
Answer: B. It tends to descend. A denser brine parcel is negatively buoyant and tends to sink.
What does an unusually shallow pycnocline indicate?
A Density changes near surface
B No density layering
C Deepest water is warm
D Salinity is uniform
Answer: A. Density changes near surface. A shallow pycnocline places the rapid density transition close to the surface.
Which water-column arrangement is gravitationally unstable?
A Light over dense
B Equal density layers
C Dense over light
D Mixed surface water
Answer: C. Dense over light. Denser water above lighter water can overturn toward a stable arrangement.
Why can an ocean density front redirect currents?
A Salinity disappears
B Waves stop forming
C The seafloor rises
D Pressure gradients develop
Answer: D. Pressure gradients develop. Horizontal density contrasts create pressure gradients that influence currents.
A surface parcel warms while its salt content stays fixed. Which tendency follows?
A It becomes more buoyant
B It becomes more dense
C It loses salinity
D It sinks inevitably
Answer: A. It becomes more buoyant. Thermal expansion lowers density and increases buoyancy.
How does brine rejection differ from freshwater dilution?
A It lowers nearby salinity
B It raises nearby salinity
C It removes pressure
D It adds river sediment
Answer: B. It raises nearby salinity. Brine rejection concentrates salt in water around newly formed sea ice.
Which layer is identified by a strong temperature gradient, not density alone?
A Pycnocline
B Halocline
C Thermocline
D Isopycnal
Answer: C. Thermocline. A thermocline marks rapid temperature change; pycnocline refers to density.
A current carries cold, salty water below warm surface water. What supports this sinking?
A Greater density
B Lower salinity
C Higher sunlight
D Lower pressure
Answer: A. Greater density. Cold, salty water is denser and can occupy deeper layers.
What happens to density when pressure rises at fixed temperature and salinity?
A It falls sharply
B It stays exact
C It turns negative
D It rises slightly
Answer: D. It rises slightly. Pressure slightly compresses seawater and increases its in-situ density.
Why can strong surface heating delay seasonal overturn?
A It adds salt below
B It strengthens buoyant layering
C It raises deep pressure
D It removes all tides
Answer: B. It strengthens buoyant layering. Heating makes surface water lighter and can stabilize stratification.
Which parcel is most likely to remain near the surface?
A Cold and salty
B Cold and briny
C Warm and fresh
D Highly compressed brine
Answer: C. Warm and fresh. Warm, fresh water has relatively low density and high buoyancy.
What observation indicates density-driven overturning?
A Dense surface water sinks
B Warm water stays above
C Salinity stays constant
D Waves move offshore
Answer: A. Dense surface water sinks. Sinking of dense surface water is a key overturning process.
Why can density stratification affect oxygen below the surface?
A It increases sunlight
B It stops respiration
C It removes salinity
D It limits vertical mixing
Answer: D. It limits vertical mixing. Restricted exchange can slow oxygen transfer between surface and deeper waters.