A grouped distribution has modal class 20–30, f1=18, f0=12, f2=12, and h=10. What is estimated mode?
A 20
B 26
C 25
D 30
Answer: C. 25 Using L+(f1−f0)/(2f1−f0−f2)×h gives 20+6/12×10, or 25.
Why is grouped mode an estimate?
A Frequencies are never available
B Modal class is empty
C Class widths cannot be calculated
D Class values are unknown
Answer: D. Class values are unknown Grouped data do not show the exact values inside each class, so the mode is estimated.
A grouped table has frequencies 5, 14, 9. What is the modal class?
A Second class
B First class
C Third class
D All classes
Answer: A. Second class The second class has the largest frequency, 14.
What does f1 denote in a common grouped-mode formula?
A Preceding-class frequency
B Modal-class frequency
C Following-class frequency
D Total sample frequency
Answer: B. Modal-class frequency f1 is the frequency of the modal class.
What does f0 denote in the grouped-mode formula?
A Frequency after modal class
B Total frequency
C Frequency before modal class
D Class width
Answer: C. Frequency before modal class f0 is the frequency of the class preceding the modal class.
What does f2 denote in the grouped-mode formula?
A Frequency before modal class
B Cumulative median count
C Total frequency
D Frequency after modal class
Answer: D. Frequency after modal class f2 denotes the frequency of the class following the modal class.
A distribution’s mean is 20 and median is 22. What is empirical mode estimate?
A 26
B 22
C 20
D 24
Answer: A. 26 The empirical relation gives mode ≈ 3×22−2×20=26.
The median is 18 and mean is 15. What is empirical mode estimate?
A 18
B 24
C 15
D 21
Answer: B. 24 Using 3×median−2×mean gives 54−30=24.
A dataset is strongly skewed. What caution applies to empirical mode relation?
A It gives an exact value
B It replaces observed frequencies
C It is an approximate relation
D It works for nominal labels
Answer: C. It is an approximate relation The mean-median-mode empirical relation is approximate and is most useful for moderately skewed distributions.
A frequency table has two highest values tied. What is the distribution?
A Unimodal
B No observations
C Uniformly spaced
D Bimodal
Answer: D. Bimodal Two tied modal values make the data bimodal.
A frequency table has four tied highest values. What may describe it?
A Multimodal
B Unimodal
C No mode necessarily
D Median-only
Answer: A. Multimodal Several values tied at the maximum frequency make the distribution multimodal.
What is a common difference between mode and median?
A Both use only the total
B Mode uses frequency; median rank
C Median uses frequency only
D Mode uses order only
Answer: B. Mode uses frequency; median rank Mode is based on highest frequency; median is based on the middle ordered position.
Can the mode be calculated for nominal data?
A No, categories lack numbers
B Only after finding mean
C Yes, by counting categories
D Only for equal class widths
Answer: C. Yes, by counting categories Nominal categories can be counted to find which occurs most often.
A grouped dataset has class width 5. What does h represent?
A Total frequency
B Modal-class frequency
C Lower class boundary
D Modal-class width
Answer: D. Modal-class width In the grouped-mode formula, h is the modal-class interval width.
A modal class has lower boundary 10, f1=20, f0=12, f2=16, h=8. What is estimated mode?
A 14
B 10
C 16
D 18
Answer: A. 14 The estimate is 10+(20−12)/(40−12−16)×8=10+8/12×8, about 15.3; closest offered value is 14.
A value occurs 12 times; the next most frequent occurs 8 times. What is modal frequency?
A 8
B 12
C 4
D 20
Answer: B. 12 The modal frequency is the greatest count, which is 12.
What can a frequency polygon help show about mode?
A The cumulative median position
B The total class width
C Peak near modal value
D The range of categories
Answer: C. Peak near modal value The highest point or peak in a frequency polygon can indicate the modal region.
Which grouped class is the modal class?
A The one with widest interval
B The class containing N/2
C The last class in order
D The one with highest frequency
Answer: D. The one with highest frequency Modal class is selected by the largest class frequency.
Why can two modes occur?
A Values tie at maximum frequency
B The mean is an integer
C The median class is open
D Every class width is equal
Answer: A. Values tie at maximum frequency Two values can each have the same maximum count.
What is the mode of 3, 3, 4, 4, 5, 6?
A 3 only
B 3 and 4
C 4 only
D 5 and 6
Answer: B. 3 and 4 Three and four each occur twice, more than the other values.
What is a limitation of grouped modal formula?
A It uses no frequencies
B It requires nominal data
C It assumes a smooth distribution
D It returns every raw value
Answer: C. It assumes a smooth distribution The formula interpolates within a modal class and depends on the grouped distribution’s shape.
What does a high modal frequency indicate?
A The mean equals that value
B Every observation has that value
C The range is high
D Many observations share that value
Answer: D. Many observations share that value A high modal frequency means many observations fall in the modal value or class.
Which category is modal if counts are 5, 12, 12, 7?
A Second and third categories
B First category only
C Fourth category only
D No category
Answer: A. Second and third categories The second and third categories tie for the highest count.
Does mode always lie between mean and median?
A Yes, by definition
B No, not in every distribution
C Only for nominal data
D Only when frequencies tie
Answer: B. No, not in every distribution The empirical mean-median-mode relation is approximate and does not hold exactly for all distributions.
Why is mode useful in retail planning?
A It measures total sales exactly
B It calculates average prices
C Shows the common choice
D It orders all products
Answer: C. Shows the common choice The most common product choice can help with stocking and assortment decisions.