What is a mineral in the usual geographical sense?
A A naturally occurring substance with a definite composition and characteristic properties
B Any manufactured rock aggregate
C A living organism in soil
D A human-made alloy
Answer: A. A naturally occurring substance with a definite composition and characteristic properties. A mineral is a naturally occurring substance with characteristic physical and chemical properties; many have a definite composition and crystal structure.
When does a mineral accumulation qualify as an ore?
A Whenever it appears in a river
B When its mineral concentration makes extraction commercially viable
C Only when it is a metal
D When it occurs below sea level
Answer: B. When its mineral concentration makes extraction commercially viable. Ore is an accumulation of a mineral mixed with other material at a concentration high enough to make extraction commercially worthwhile.
Which clue places iron ore in the ferrous group?
A It dissolves in water
B It is always found in sedimentary beds
C It contains iron
D It is used only as fuel
Answer: C. It contains iron. Ferrous minerals contain iron; iron ore and manganese are common examples.
Bauxite is most directly associated with production of which metal?
A Copper
B Tin
C Lead
D Aluminium
Answer: D. Aluminium. Bauxite is the principal ore used to obtain aluminium.
Which Indian mineral is especially valued as an electrical insulator?
A Limestone
B Mica
C Gypsum
D Coal
Answer: B. Mica. Mica splits into thin sheets and has insulating properties useful in electrical and electronic equipment.
Where are most of India’s metallic mineral deposits concentrated?
A The young alluvial plain of the Ganga
B The sandy surface of the Thar alone
C The old crystalline rocks of the Peninsular Plateau
D The delta of the Ganga alone
Answer: C. The old crystalline rocks of the Peninsular Plateau. Much of India’s metallic mineral wealth is associated with old igneous and metamorphic rocks of the Peninsular Plateau.
Why are the northern alluvial plains generally poor in major economic minerals?
A They receive too much monsoon rain
B They contain no rocks of any kind
C They are all covered by permanent ice
D They are not underlain by the old mineral-rich crystalline formations typical of the peninsula
Answer: D. They are not underlain by the old mineral-rich crystalline formations typical of the peninsula. India’s vast northern alluvial plains are almost devoid of economic minerals compared with the old crystalline peninsula.
What best explains the uneven distribution of mineral resources across India?
A Geological structure, formation processes and geological time vary from region to region
B Every state has identical rocks but different flags
C Minerals move seasonally with monsoon winds
D Minerals form only where population is high
Answer: A. Geological structure, formation processes and geological time vary from region to region. Mineral distribution reflects differences in geological structure, processes and the time available for formation.
Why are mineral resources described as non-renewable on a human timescale?
A They are created every harvest season
B They are renewed by daily rainfall
C They form very slowly over geological time and cannot be replenished quickly
D They occur only in living forests
Answer: C. They form very slowly over geological time and cannot be replenished quickly. Mineral deposits may take millions of years to form, so replenishment is negligible relative to current use.
Which broad setting in India is strongly associated with petroleum deposits?
A The high peaks of the Himalaya only
B The alluvial surface of Punjab only
C The crystalline plateau of Bundelkhand only
D Sedimentary basins of Assam, Gujarat and the offshore Mumbai High region
Answer: D. Sedimentary basins of Assam, Gujarat and the offshore Mumbai High region. Petroleum is concentrated in sedimentary basins such as Assam, Gujarat and Mumbai High.
The major Gondwana coalfields are associated with which kind of setting?
A Ancient sedimentary basins and river valleys of peninsular India
B Recent coral reefs around Lakshadweep
C Glacial valleys of the Himalaya
D Only the western coastal sand dunes
Answer: A. Ancient sedimentary basins and river valleys of peninsular India. Most Indian coal reserves occur in Gondwana sedimentary formations in valleys such as the Damodar, Sone, Mahanadi and Godavari.
Jharia is best identified as a major coalfield in which state?
A Kerala
B Jharkhand
C Punjab
D Goa
Answer: B. Jharkhand. Jharia is a well-known coalfield of Jharkhand in the Damodar valley region.
Neyveli is well known for deposits of which fuel mineral?
A Anthracite
B Uranium
C Natural graphite
D Lignite
Answer: D. Lignite. Neyveli in Tamil Nadu is a major lignite field.
Bailadila, a high-grade iron ore area, is located in which state?
A Chhattisgarh
B Rajasthan
C Assam
D Tamil Nadu
Answer: A. Chhattisgarh. The Bailadila range in Chhattisgarh is an important high-grade hematite iron ore area.
Kudremukh is associated with iron ore in which state?
A Bihar
B Karnataka
C Gujarat
D Haryana
Answer: B. Karnataka. Kudremukh is an iron ore area in the Karnataka portion of the Peninsular Plateau.
Which adjoining states form a major eastern iron-ore belt?
A Punjab and Haryana
B Kerala and Tamil Nadu
C Odisha and Jharkhand
D Gujarat and Maharashtra
Answer: C. Odisha and Jharkhand. A major iron-ore belt spans the adjoining mineral-rich areas of Odisha and Jharkhand.
Bauxite deposits in India are commonly associated with which landform and process?
A Plateaus and hills where weathering leaves aluminium-rich material
B Recent river bars formed by seasonal floods
C Coral islands formed in lagoons
D Wind-blown dunes in cold deserts
Answer: A. Plateaus and hills where weathering leaves aluminium-rich material. Bauxite commonly forms as a residual deposit through weathering of aluminium-rich rocks in plateau and hill settings.
Why is manganese important to the iron and steel industry?
A It is the main source of petroleum
B It replaces iron ore in every blast furnace
C It is used as an alloying mineral in steel manufacture
D It is used only to make glass
Answer: C. It is used as an alloying mineral in steel manufacture. Manganese is used in steel-making as an alloying mineral and for improving the properties of steel.
Which mineral is a basic raw material for cement manufacture?
A Mica
B Limestone
C Copper ore
D Manganese nodule
Answer: B. Limestone. Limestone is a major raw material for the cement industry.
Khetri, a familiar copper-mining area, lies in which state?
A Odisha
B Kerala
C West Bengal
D Rajasthan
Answer: D. Rajasthan. Khetri in Rajasthan is a prominent copper-producing area.
The Koderma–Gaya–Hazaribagh belt is best linked with which mineral?
A Petroleum
B Mica
C Bauxite
D Lignite
Answer: B. Mica. The Koderma–Gaya–Hazaribagh region is a classic mica belt on the edge of the Chota Nagpur Plateau.
A placer deposit is most likely to be found in which material?
A A deep coal seam formed from buried vegetation
B A solidified lava flow
C A horizontal salt bed beneath a desert
D Alluvial sand and gravel where dense minerals have accumulated
Answer: D. Alluvial sand and gravel where dense minerals have accumulated. Placer deposits form when heavy minerals concentrate in river sands, gravels or other loose sediments.
Veins and lodes of minerals are commonly found in what setting?
A Only in modern delta mud
B Within living tree trunks
C Cracks and fissures in igneous and metamorphic rocks
D In surface clouds
Answer: C. Cracks and fissures in igneous and metamorphic rocks. In igneous and metamorphic rocks, minerals may fill cracks and fissures to form veins and lodes.
Coal and some other minerals occur in sedimentary rocks mainly as what?
A Beds or layers formed through deposition and accumulation
B Crystals in volcanic vents only
C Veins inside glacier ice
D Metallic coatings on leaves
Answer: A. Beds or layers formed through deposition and accumulation. Sedimentary minerals may occur in strata or beds formed by deposition and accumulation over time.
Which action directly conserves mineral resources?
A Discarding usable metals after one use
B Mining lower-grade ore without planning
C Recycling metal scrap and using suitable substitutes
D Increasing wastage during processing
Answer: C. Recycling metal scrap and using suitable substitutes. Recycling metals and using substitutes reduce demand for new extraction from finite deposits.