Difficulty: Medium
Why is the mean sensitive to an extreme value?
A It ignores the largest observation
B It depends only on order
C It uses every numerical value
D It counts the mode
Answer: C. It uses every numerical value. Every observation contributes to the sum, so an extreme value can pull the mean.
Which measure is often more resistant to outliers?
A Arithmetic mean
B Weighted mean
C Range
D Median
Answer: D. Median. The median depends on the ordered middle position and is usually less affected by extreme values.
The mean of 10 observations is 20. One value rises by 30. How much does the mean change?
A 3
B 10
C 20
D 30
Answer: A. 3. The mean changes by 30 divided by 10, which equals 3.
The mean of 8 values is 12. One value is mistakenly recorded 10 too high. How far is the mean overstated?
A 8
B 1.25
C 10
D 12.5
Answer: B. 1.25. The total is overstated by 10 across eight observations, so the mean is 10 divided by 8.
Why use class midpoints for grouped mean?
A They preserve every raw value
B They equal cumulative frequencies
C Represent values within each class
D They remove sampling error
Answer: C. Represent values within each class. Midpoints serve as representative values when individual observations inside classes are unknown.
A grouped table has midpoints 5 and 15, frequencies 2 and 3. What is the mean?
A 10
B 12
C 20
D 11
Answer: D. 11. The weighted sum is 10 plus 45 equals 55; divide by total frequency 5.
What does Ξ£f equal in a frequency table?
A Total observations
B Weighted sum
C Mean of values
D Largest class midpoint
Answer: A. Total observations. Summing all class frequencies gives the total number of observations.
A group’s mean is 10 across 5 observations. Another mean is 20 across 15. What is combined mean?
A 15
B 17.5
C 18
D 30
Answer: B. 17.5. The weighted total is 50 plus 300 equals 350; divide by 20.
Why is averaging group means directly often wrong?
A Means cannot be added
B All group values are missing
C Group sizes may differ
D Larger group mean is invalid
Answer: C. Group sizes may differ. An unweighted average gives small and large groups equal influence, even when their sizes differ.
A dataset has deviations β3, β1, 0, 1, and 3 from its mean. What is their sum?
A 3
B 6
C β3
D 0
Answer: D. 0. The positive and negative deviations cancel, as deviations from the mean sum to zero.
If each value is decreased by 4, how does the mean change?
A It decreases by 4
B It increases by 4
C It stays unchanged
D It decreases by four n
Answer: A. It decreases by 4. Subtracting the same constant from every value subtracts it from the mean.
A frequency table records values 2, 4, 8 with frequencies 3, 2, 1. What is the mean?
A 14/3
B 22/6
C 6
D 8
Answer: B. 22/6. The weighted total is 6 plus 8 plus 8 equals 22; total frequency is 6.
A mean is 15 for 12 observations. What total does this imply?
A 27
B 15
C 180
D 144
Answer: C. 180. Multiply 15 by 12 to obtain the total 180.
Four values average 9. A fifth value of 14 is added. What is the new mean?
A 9.5
B 11
C 14
D 10
Answer: D. 10. The original total is 36; after adding 14, 50 divided by 5 equals 10.
A dataset has mean 8 and 5 observations. Four values total 27. What is the fifth?
A 13
B 8
C 5
D 40
Answer: A. 13. The required total is 8 times 5, or 40; subtract 27 to get 13.
What does a weighted mean account for?
A Only the largest observation
B Different contributions or importance
C The order of the data
D The number of categories only
Answer: B. Different contributions or importance. Weights allow some values or groups to contribute more according to their size or importance.
A course grade averages exams weighted by credits. Which mean is suitable?
A Simple unweighted mean
B Mode
C Weighted arithmetic mean
D Range
Answer: C. Weighted arithmetic mean. A credit-weighted mean reflects the different contribution of each course.
Why can grouped-data mean be approximate?
A Frequencies are never known
B Midpoints are always zero
C Class widths cannot be measured
D Values inside classes are unknown
Answer: D. Values inside classes are unknown. The midpoint method represents every observation in a class by its midpoint.
What can an assumed mean change?
A The calculation steps
B The actual observations
C The final arithmetic mean
D The class frequencies
Answer: A. The calculation steps. The assumed-mean method changes the arithmetic process, not the data or final mean.
Why use step-deviation with equal class widths?
A It changes the class boundaries
B It simplifies larger deviations
C It finds the median directly
D It removes all frequencies
Answer: B. It simplifies larger deviations. Dividing deviations by a common width can make grouped calculations shorter.
A worker’s pay is recorded as 25 instead of 250. What is affected?
A The median must double
B The mode becomes 250
C Mean may be pulled down
D The range becomes zero
Answer: C. Mean may be pulled down. The incorrect low value reduces the total and can pull the mean downward.
Which description best fits the mean?
A The most common category
B The middle ordered value
C The gap between extremes
D A balancing point of values
Answer: D. A balancing point of values. The mean is the balance point where deviations above and below cancel.
A population group has a very high income. What may happen to average income?
A The mean may rise sharply
B The median must match it
C The range must shrink
D The mode must increase
Answer: A. The mean may rise sharply. A high extreme income raises the arithmetic mean even if most incomes stay unchanged.
What is essential when calculating a mean from frequencies?
A Ignore repeated observations
B Use frequencies as weights
C Use class limits only
D Divide by the largest value
Answer: B. Use frequencies as weights. Each frequency indicates how many times its value contributes to the total.
Why report the mean with context?
A It always shows every value
B It cannot be compared
C It may hide uneven distribution
D It has no measurement unit
Answer: C. It may hide uneven distribution. A mean alone can conceal spread, outliers, or unequal distribution across observations.