A global seismic model shows S-wave speed dropping to zero at the core–mantle boundary. Which interpretation fits best?
A Wave enters atmosphere
B Wave enters lithosphere
C Wave crosses Moho
D Entered liquid outer core
Answer: D. The wave has entered Earth’s liquid outer core. S-waves require shear rigidity and cannot travel through the liquid outer core.
Why can direct P-waves reappear at stations more than about 140° from an earthquake after a shadow zone?
A S-waves cross core
B P-waves follow surface
C Earth’s rotation reverses the waves
D Refracts through core
Answer: D. P-waves refract through the core and later emerge beyond the shadow region. Refraction through the core redirects some compressional-wave paths so core phases can reach stations beyond the direct P-wave shadow zone.
A compressional phase is recorded after travelling through mantle, outer core, then mantle again. Which notation best represents that path?
A PKP
B LLL
C SSS
D PPP
Answer: A. PKP. PKP denotes a P-wave path with a K segment through the liquid outer core.
At the core–mantle boundary, P-wave speed drops markedly while density rises. Which change is most directly consistent with this combination?
A Ocean-air transition
B Outer-inner core boundary
C Solid mantle to liquid core
D Lower mantle to crust
Answer: C. A transition from solid silicate mantle into liquid metallic outer core. The core–mantle boundary separates silicate mantle from liquid iron-rich outer core and produces a strong seismic velocity contrast.
Why does a liquid have no propagating S-wave speed in the ideal elastic description?
A Its density is zero
B Its bulk modulus is zero
C Below freezing
D Its shear modulus is zero
Answer: D. Its shear modulus is zero. S-wave speed depends on shear rigidity; an ideal liquid has zero shear modulus.
The 410-km mantle discontinuity is classified mainly as a mineral phase boundary because it reflects:
A Upper-mantle melting
B Ocean-continent crust change
C Liquid-core start
D Pressure-driven mantle change
Answer: D. A pressure-driven transformation within mantle silicates. The 410-km velocity increase is largely explained by a denser high-pressure phase of mantle silicate minerals.
Which phase change is commonly linked to the mantle discontinuity near 660 km?
A Conversion of basalt into seawater
B Melting of the continental crust
C Iron freezes inward
D Ringwoodite breaks down
Answer: D. Breakdown of ringwoodite into denser lower-mantle phases. At pressures near the 660-km boundary, ringwoodite breaks down into denser minerals characteristic of the lower mantle.
The Dʺ (D-double-prime) region is located:
A Lowermost mantle
B Inside the inner core only
C Between the atmosphere and hydrosphere
D Continental crust top
Answer: A. In the lowermost mantle just above the core–mantle boundary. Dʺ is a complex region at the base of the mantle immediately above the core–mantle boundary.
An ultra-low-velocity zone is detected near the base of the mantle. Which explanation is scientifically plausible?
A Composition or partial melt
B P-waves cannot cross solids
C Ozone layer effect
D Entire mantle is liquid
Answer: A. Localized composition or partial melt may contribute. Ultra-low-velocity zones may reflect unusual composition, partial melt, or both; their detailed nature is still investigated.
A tomographic image shows a fast seismic anomaly descending beneath a subduction zone. The most likely interpretation is a:
A Gas cloud in crust
B Mantle-base ocean
C Hot core plume
D Cold dense slab sinks
Answer: D. Relatively cold, dense slab sinking into the mantle. Cold subducted lithosphere commonly transmits seismic waves faster than surrounding warmer mantle.
A broad slow seismic anomaly beneath a volcanic region most plausibly indicates mantle that is:
A Warmer or compositionally distinct
B Made entirely of liquid metal
C Identical to the inner core
D Always colder and denser
Answer: A. Warmer and/or compositionally different from its surroundings. Lower seismic velocities often occur in hotter or compositionally distinct mantle, although interpretation depends on multiple factors.
Why must seismic-tomography images be interpreted with care?
A Uses no seismic data
B Resolution limits interpretation
C Slow means fully molten
D Each pixel names one mineral
Answer: B. Resolution and trade-offs limit how uniquely travel-time data define structure. Tomographic resolution varies, and temperature, composition, anisotropy, and data coverage can produce trade-offs.
What is one common cause of seismic anisotropy in mantle rocks?
A Aligned crystals or fabric
B Water in every pore
C A uniform temperature throughout Earth
D Earth’s surface latitude alone
Answer: A. Preferential alignment of crystals or deformation fabrics. Aligned minerals and deformation fabrics can make seismic waves travel at different speeds in different directions.
The geodynamo is sustained most directly by:
A Conducting outer-core convection
B Atmospheric wind belts
C Tides in the open ocean
D Crust-only conduction
Answer: A. Convection of electrically conducting fluid in the outer core. Convection in the electrically conducting liquid outer core drives the geodynamo that produces Earth’s magnetic field.
As the inner core slowly grows, which process can help drive outer-core convection?
A Latent heat; buoyant elements
B Mantle iron evaporates
C Equatorial seawater freezes
D Sunlight heats crust
Answer: A. Release of latent heat and buoyant light elements during solidification. Inner-core solidification releases latent heat and can expel lighter elements, contributing buoyancy to outer-core convection.
Which observations are combined to estimate Earth’s radial density structure?
A Longitude and magnetic declination alone
B Clouds and winds only
C Seismic, gravity, rotation data
D River flow and soil colour
Answer: C. Seismic data, gravity, mass, and moment of inertia. Seismic structure is interpreted alongside gravity, total mass, and moment-of-inertia constraints.
Earth’s moment of inertia is lower than it would be for a uniform-density sphere of the same mass and radius. This implies that:
A The mantle is empty
B Crust denser than core
C Mass concentrated centrally
D Mass only at surface
Answer: C. Mass is concentrated toward the centre. A lower moment of inertia indicates that a larger share of Earth’s mass lies closer to its rotation axis and centre.
Which statement best describes pressure and the solid inner core?
A Inner core colder than surface
B Pressure absent at centre
C Pressure keeps iron-rich core solid
D Core has no iron
Answer: C. High central pressure helps keep iron-rich material solid despite very high temperature. The melting point of iron-rich material rises under the immense pressures found at Earth’s centre.
The sharp density increase at the mantle–core boundary supports which inference?
A Mantle is gaseous
B Metal-rich core; distinct mantle
C Crust reaches the centre
D Core less dense than air
Answer: B. The core is compositionally distinct and richer in dense metal than the mantle. The strong density contrast is consistent with a metallic core beneath silicate mantle.
Why are high-pressure laboratory experiments important for interpreting mantle discontinuities?
A Creates Earth’s magnetic field
B Replaces seismic observations
C Minerals tested at deep pressures
D Sample mantle directly
Answer: C. They test how minerals change structure and density at deep-Earth pressures. Laboratory mineral physics helps identify phase changes that can explain seismic velocity jumps at depth.
Which material is widely considered representative of much of the upper mantle?
A Liquid nickel
B Pure granite
C Olivine-pyroxene peridotite
D Water ice
Answer: C. Peridotite rich in olivine and pyroxenes. Peridotite, dominated by olivine and pyroxenes, is a common model rock for the upper mantle.
The core is inferred to be mainly iron-rich, but its density is lower than pure iron at the same pressure. What does this suggest?
A Seismic waves cannot measure density
B Iron mixed with lighter elements
C All iron lies in mantle
D The core is mostly water
Answer: B. Lighter elements are mixed with iron in the core. Core models include lighter elements such as sulfur, oxygen, silicon, carbon, or hydrogen in addition to iron and nickel.
A reflected seismic arrival becomes strong at a boundary with a large contrast in wave impedance. Which properties make up seismic impedance?
A Salinity and ocean depth
B Density and seismic-wave velocity
C Magnetic field and wind speed
D Temperature and latitude
Answer: B. Density and seismic-wave velocity. Acoustic or seismic impedance is the product of material density and wave velocity, and contrasts influence reflection.
Earth’s free oscillations after a very large earthquake provide information because the planet:
A Produces only atmospheric sound waves
B Structure-dependent global vibrations
C Stops rotating temporarily
D Melts inner core
Answer: B. Vibrates in global modes whose frequencies depend on its internal structure. Global normal-mode frequencies depend on Earth’s density, elastic structure, and internal boundaries.
Why is the inner core thought to be solid while the outer core is liquid, despite both being iron-rich?
A Inner core has no metal
B Pressure shifts melting conditions
C Outer core above crust
D Outer core is colder
Answer: B. Pressure is much greater at the centre, shifting the melting conditions. The pressure difference across the core changes iron’s melting conditions; the inner core remains solid under extreme central pressure.