Difficulty: Medium
Of 100 solar units, 29 are reflected. How many are absorbed by Earth?
A 71 units
B 29 units
C 48 units
D 100 units
Answer: A. 71 units. The absorbed share is the remainder after reflection: 100 − 29 = 71 units.
A budget assigns 23 units to air and 48 to surface. How much is reflected?
A 23 units
B 48 units
C 29 units
D 71 units
Answer: C. 29 units. The unabsorbed share is 100 − 23 − 48 = 29 units.
A surface receives 800 W/m² and has albedo 0.25. How much is absorbed?
A 200 W/m²
B 600 W/m²
C 400 W/m²
D 800 W/m²
Answer: B. 600 W/m². Absorbed flux is (1 − albedo) × incoming flux: 0.75 × 800.
How can clouds lower surface insolation?
A Create solar energy
B Stop Earth’s rotation
C Reduce solar distance
D Reflect and absorb sunlight
Answer: D. Reflect and absorb sunlight. Clouds can reflect sunlight to space and absorb some incoming radiation.
Albedo rises by 0.10 under 500 W/m². How much more is reflected?
A 50 W/m²
B 5 W/m²
C 10 W/m²
D 100 W/m²
Answer: A. 50 W/m². The reflected increase is 0.10 × 500 W/m² = 50 W/m².
A 900 W/m² beam hits horizontally at a 30° zenith angle. What is direct flux?
A 450 W/m²
B 900 W/m²
C 779 W/m²
D 1,039 W/m²
Answer: C. 779 W/m². Horizontal direct flux is beam irradiance × cos zenith: 900 × cos 30° ≈ 779.
At 60° solar elevation, what fraction of direct beam reaches a flat surface?
A 0.50
B 0.71
C 1.00
D 0.87
Answer: D. 0.87. Solar zenith is 30°, and cos 30° is about 0.87.
A surface receives 450 W/m² for eight hours. What energy arrives?
A 3.60 MJ/m²
B 12.96 MJ/m²
C 9.60 MJ/m²
D 16.20 MJ/m²
Answer: B. 12.96 MJ/m². Multiply 450 W/m² by 28,800 seconds to get 12.96 megajoules per square metre.
What unit represents accumulated solar energy per area?
A Watts per kilogram
B Kelvins per hour
C Joules per square metre
D Metres per second
Answer: C. Joules per square metre. Time-integrated solar energy per area is measured in joules per square metre.
Earth-Sun distance grows by 10%. What happens to irradiance?
A Falls to 82.6%
B Rises to 110%
C Falls to 90%
D Falls to 50%
Answer: A. Falls to 82.6%. Inverse-square scaling gives 1 ÷ 1.1² ≈ 0.826 of the original irradiance.
If Sun-Earth distance doubles, what happens to irradiance?
A Doubles
B Falls by one-half
C Stays unchanged
D Falls to one-quarter
Answer: D. Falls to one-quarter. Irradiance follows the inverse-square law, so doubling distance yields one-quarter.
A 5% decrease in distance changes irradiance by about what?
A Decreases 5%
B Increases 10.8%
C Increases 5%
D Doubles
Answer: B. Increases 10.8%. The ratio is 1 ÷ 0.95² ≈ 1.108, about a 10.8% increase.
A 0.1% change in 1,361 W/m² is about how much?
A 1.36 W/m²
B 0.14 W/m²
C 13.6 W/m²
D 136 W/m²
Answer: A. 1.36 W/m². One tenth of one percent is 0.001; multiplying by 1,361 gives 1.361 W/m².
In NASA’s 100-unit budget, how much is absorbed in air?
A 29 units
B 48 units
C 23 units
D 71 units
Answer: C. 23 units. NASA’s illustrative budget assigns about 23 of 100 incoming units to atmospheric absorption.
At a 340 W/m² global mean, what is 48% surface absorption?
A 78 W/m²
B 163 W/m²
C 99 W/m²
D 240 W/m²
Answer: B. 163 W/m². Multiply 340 W/m² by 0.48 to obtain about 163 W/m².
At a 340 W/m² global mean, what is 23% atmospheric absorption?
A 34 W/m²
B 98 W/m²
C 163 W/m²
D 78 W/m²
Answer: D. 78 W/m². Multiply 340 W/m² by 0.23 to obtain about 78 W/m².
At a 340 W/m² global mean, what is 29% reflected?
A 99 W/m²
B 48 W/m²
C 78 W/m²
D 163 W/m²
Answer: A. 99 W/m². Multiply 340 W/m² by 0.29 to obtain about 99 W/m².
Under equal sunlight, which surface absorbs more?
A High-albedo snow
B Bright cloud
C Low-albedo dark surface
D White ice
Answer: C. Low-albedo dark surface. A darker, lower-albedo surface reflects less and absorbs more incoming solar energy.
What does a planet’s Bond albedo quantify?
A Outgoing heat rate
B Solar distance
C Atmospheric pressure
D Reflected solar energy share
Answer: D. Reflected solar energy share. Bond albedo is the fraction of incoming solar energy reflected by a body across directions and wavelengths.
What does rising planetary albedo do to absorbed solar energy?
A Raises absorption
B Reduces absorption
C Leaves it fixed
D Stops outgoing heat
Answer: B. Reduces absorption. A higher planetary albedo reflects more incoming shortwave radiation and lowers absorption.
What follows when melting snow exposes darker ground?
A Albedo rises; absorption falls
B Both remain fixed
C Albedo drops; absorption rises
D Solar output doubles
Answer: C. Albedo drops; absorption rises. The newly exposed darker surface reflects less and absorbs more sunlight.
With equal flux, which location receives more daily energy?
A Longer daylight period
B Shorter daylight period
C Lower solar elevation
D Higher albedo
Answer: A. Longer daylight period. At the same average flux, a longer period of daylight yields more accumulated energy.
Why is a 24-hour mean lower than the daytime mean?
A Nighttime Sun is brighter
B Earth radiates no heat
C Albedo becomes zero
D Nighttime has no sunlight
Answer: D. Nighttime has no sunlight. A full-day average includes hours of darkness with no incoming sunlight.
A 400 W/m² flux lasts six hours. What is its 24-hour mean?
A 25 W/m²
B 100 W/m²
C 200 W/m²
D 400 W/m²
Answer: B. 100 W/m². The daily total is 8.64 MJ/m²; dividing by 86,400 seconds gives 100 W/m².
If absorbed solar energy exceeds energy lost for a while, what happens?
A Earth system cools
B Temperature stays fixed
C Earth system warms
D Albedo becomes zero
Answer: C. Earth system warms. A positive energy imbalance adds heat to the Earth system.