A steel plant needs bulky iron ore, coking coal and limestone. Which location logic best explains its eastern plateau concentration?
A The region has no transport links
B The region is the largest cotton-growing area
C It is close to coal and iron-ore sources, lowering the movement of heavy inputs
D Steel production needs no raw materials
Answer: C. It is close to coal and iron-ore sources, lowering the movement of heavy inputs. The Chhotanagpur and eastern plateau region offers nearby mineral inputs and transport, supporting integrated steelmaking.
A sugar mill is located close to sugarcane farms. Which raw-material property most strongly supports this choice?
A The crop is non-perishable and weightless
B The crop is an imported mineral
C The crop requires offshore shipping
D Sugarcane is bulky and loses sucrose after harvest, so quick processing matters
Answer: D. Sugarcane is bulky and loses sucrose after harvest, so quick processing matters. Sugarcane is bulky and its sucrose content declines after cutting; nearby mills reduce delays and transport losses.
Why did some sugar mills shift towards western and southern India?
A The region has no sugarcane
B Cane may have higher sucrose, the crushing season can be longer, and cooperatives have worked well
C It is closer to jute fields
D It lacks all cooperative activity
Answer: B. Cane may have higher sucrose, the crushing season can be longer, and cooperatives have worked well. Higher sucrose content, a longer season in cooler conditions and successful cooperatives helped shift mills south and west.
Jute mills cluster near the Hugli although raw jute is grown farther upstream. Which combination helps explain the cluster?
A Only high-altitude climate
B No access to markets
C Raw-jute access, water, transport, labour, port and financial services
D Proximity to bauxite mines alone
Answer: C. Raw-jute access, water, transport, labour, port and financial services. The Hugli basin offers jute-growing areas, inexpensive water transport, rail and road links, water, labour and Kolkataβs port and services.
A jute mill uses raw material from a different country after Partition. What geographical change most directly caused this adjustment?
A The jute-growing areas were divided by the 1947 boundary while many mills remained in India
B The Hugli river changed direction
C Jute ceased to grow in the delta
D Kolkata lost all transport links
Answer: A. The jute-growing areas were divided by the 1947 boundary while many mills remained in India. Partition left most mills in India while a large share of jute-producing land became part of East Pakistan, later Bangladesh.
An aluminium smelter is proposed where bauxite is available but electricity is unreliable. What is the main location problem?
A Bauxite cannot be smelted
B Aluminium is a textile product
C Smelters require no electricity
D Smelting needs a regular, affordable power supply as well as raw material
Answer: D. Smelting needs a regular, affordable power supply as well as raw material. Aluminium smelting is power-intensive; secure electricity and affordable bauxite are prime location factors.
A cement plant is built near limestone deposits rather than a distant city. Why can that reduce cost?
A Cement is a weightless service
B Both limestone and cement are bulky, making transport cost important
C Limestone forms only in cities
D Markets have no influence on industry
Answer: B. Both limestone and cement are bulky, making transport cost important. Cement production uses bulky mineral inputs and makes heavy products, so proximity to raw materials and transport matters.
A cotton mill remains in a large city after raw cotton farming expands elsewhere. Which factor can help explain its persistence?
A Skilled labour, finance, transport, port links and a large market can outweigh distance from farms
B Cotton cannot be transported
C The mill creates its own rainfall
D Textile production needs no market
Answer: A. Skilled labour, finance, transport, port links and a large market can outweigh distance from farms. Industry locations reflect several factors, including labour, capital, transport and markets, not raw material alone.
A cluster of firms shares power infrastructure, suppliers and a skilled workforce. What is this location advantage called in practical terms?
A A mineral belt
B Agglomeration economies
C A crop rotation system
D An ocean current
Answer: B. Agglomeration economies. Firms clustered together can share suppliers, services, labour pools and infrastructure, reducing costs.
A factory locates in a backward district after receiving a tax concession and subsidised electricity. Which influence is this?
A Government incentive shaping industrial location
B A change in geology
C A change in rainfall
D A change in crop season
Answer: A. Government incentive shaping industrial location. Public policy can offset disadvantages and attract investment through infrastructure and incentives.
A machinery producer buys steel from a nearby integrated plant. Which relationship is shown?
A A basic industry supplying an intermediate input to a downstream industry
B Primary activity replacing manufacturing
C Market replacing all inputs
D Industrial pollution creating a resource
Answer: A. A basic industry supplying an intermediate input to a downstream industry. Steel is a basic input used by machinery and engineering industries, creating backward and forward linkages.
Which manufacturing chain gives the clearest example of linked industries?
A Monsoon β cotton crop β ocean tide
B Jute fibre β coal seam β rainfall
C Limestone β migratory birds β river delta
D Iron and steel β engineering machinery β transport equipment
Answer: D. Iron and steel β engineering machinery β transport equipment. Steel feeds machinery and engineering, whose products include equipment and transport goods.
A factory discharges heated water into a river used by fish and downstream communities. What type of pollution is most directly involved?
A Thermal pollution
B Noise pollution
C Light pollution
D Soil salinity only
Answer: A. Thermal pollution. Hot effluent can change water temperature and harm aquatic ecosystems, producing thermal pollution.
A plant has dust and sulphur-bearing emissions from combustion. Which control is most appropriate?
A Discharge them into a river
B Dilute them with untreated sewage
C Use cleaner fuels and install suitable emission-control equipment
D Move them into residential areas
Answer: C. Use cleaner fuels and install suitable emission-control equipment. Cleaner fuels and emission-control devices reduce harmful gases and particulates from industrial stacks.
A townβs new factories create jobs but also traffic, waste and housing pressure. What is the best planning response?
A Ignore infrastructure needs
B Coordinate industrial growth with housing, transport, water and pollution management
C Stop all municipal services
D Separate workers from every service
Answer: B. Coordinate industrial growth with housing, transport, water and pollution management. Industrial growth requires urban planning so jobs are supported by services and environmental safeguards.
A plant processes milk from nearby farms into packaged products. Which location factor is especially important?
A Distance from all farms
B Proximity to coal seams only
C Perishability and quick access to the raw milk supply
D Altitude above the snowline
Answer: C. Perishability and quick access to the raw milk supply. Dairy processing is often near supply because milk is perishable and must be collected quickly.
A petroleum refinery separates crude into several products. Which broad manufacturing method does it illustrate?
A Analytical processing
B Assembling
C Cottage weaving
D Crop cultivation
Answer: A. Analytical processing. An analytical industry separates components from a common raw material; oil refining is a standard example.
A manufacturer combines limestone, silica, alumina and gypsum to make cement. Which method category best describes this process?
A Extractive
B Analytical
C Pastoral
D Synthetical
Answer: D. Synthetical. A synthetical industry combines different ingredients into a new product; cement is a common example.
A plant assembles imported components into cars. Which location factor may matter more than nearby raw-material deposits?
A Presence of a jute crop
B A nearby coalfield
C Bauxite quality only
D Market access, suppliers, skilled labour and transport links
Answer: D. Market access, suppliers, skilled labour and transport links. Assembly industries often need supplier networks, skilled labour, transport and access to customers more than local ore.
A region offers skilled workers but poor roads and unreliable power. What is the best inference for a new factory?
A Labour advantage may be offset by infrastructure and power constraints
B All industries must locate there
C Transport does not affect cost
D Power supply is irrelevant to production
Answer: A. Labour advantage may be offset by infrastructure and power constraints. Location choices weigh multiple inputs; strong labour access cannot automatically compensate for weak infrastructure.
A factory shifts closer to a port after expanding exports. Which location factor gained importance?
A Mineral composition
B Transport and access to external markets
C Soil fertility
D Latitude
Answer: B. Transport and access to external markets. Ports reduce shipping friction for imported inputs and exported products, especially in export-oriented industries.
A handloom cooperative uses local cotton and household skills with limited machinery. Which industrial form is most likely?
A Large-scale integrated steel
B Heavy petroleum refining
C Public utility generation
D Small-scale or cottage production
Answer: D. Small-scale or cottage production. Small-scale and cottage units use relatively limited capital and may rely on household or local labour.
A steel company sells rolled steel to carmakers and construction firms. How is steel classified in this use?
A A final consumer service
B An intermediate input or basic material
C An agricultural crop
D A transport mode
Answer: B. An intermediate input or basic material. Steel is an intermediate product used by engineering, construction and other industries.
A factory treats and recycles process water before releasing the remainder. Which goal does this chiefly support?
A Increasing untreated discharge
B Removing the need for power
C Reducing water demand and limiting effluent pollution
D Making raw materials renewable
Answer: C. Reducing water demand and limiting effluent pollution. Water recycling lowers freshwater use and reduces the volume of polluted wastewater discharged.
Sugar mills can use bagasse produced during cane crushing for which important industrial purpose?
A Producing aluminium from bauxite
B Separating crude petroleum into fractions
C Generating electricity and process heat
D Retting jute fibre in the river
Answer: C. Generating electricity and process heat. Bagasse is fibrous cane residue that can be burned in boilers for process energy and cogeneration of electricity.