1. Why does Singapore have a high arithmetic density despite having a far smaller population than many countries?
A Its land area is also very small
B It has no urban population
C Its population is spread over a continent
D Its density denominator is ocean area only
Answer: A. Its land area is also very small. A compact territory combined with a large urban population produces a high people-per-area ratio.
2. Which statement about Bangladesh’s population density is generally correct?
A It is low because the country is mostly uninhabited desert
B It has no urban settlements
C It is high among large countries because many people live on limited land
D Its density is determined only by its coastline
Answer: C. It is high among large countries because many people live on limited land. Bangladesh is one of the most densely populated large countries, with extensive settlement on its deltaic lowlands.
3. Mongolia has a low average population density chiefly because it has what?
A A very small land area and large population
B A large territory with a relatively small population
C No land suitable for any settlement
D A population concentrated uniformly at the coast
Answer: B. A large territory with a relatively small population. Mongolia covers a large area but has a comparatively small population, yielding a low average density.
4. Canada’s low average density can coexist with urban clusters because most residents live where?
A Across the Arctic islands
B In the northern tundra
C Evenly throughout the interior
D In southern areas near the U.S. border
Answer: D. In southern areas near the U.S. border. Canada’s population is concentrated mainly in the south, while large northern areas remain sparsely settled.
5. Australia’s low national density is strongly influenced by what?
A Its vast arid and sparsely settled interior
B A lack of any coastal cities
C A very small land area
D Uniformly dense settlement in the outback
Answer: A. Its vast arid and sparsely settled interior. Large dry interior regions contribute to Australia’s low average density despite coastal city concentrations.
6. Monaco’s high population density is primarily a result of what combination?
A Few residents across a continental area
B A large rural population on extensive farmland
C Many residents in a very small territory
D A high proportion of uninhabited desert
Answer: C. Many residents in a very small territory. Small land area combined with an urban population can create a very high arithmetic density.
7. A city planner compares residents per hectare across residential blocks. Which topic are they most directly measuring?
A Agricultural density
B Residential density
C Physiological density
D Crude birth rate
Answer: B. Residential density. Residents per hectare in housing areas is a measure of residential density.
8. Which density pattern is most likely within a traditional metropolitan region?
A Identical values in the center and all suburbs
B Highest values only in remote farmland
C No variation across the city
D High values in the core and lower values toward the fringe
Answer: D. High values in the core and lower values toward the fringe. Many cities show a central-to-peripheral density gradient, though local patterns vary.
9. What can a population-density map help a local government identify?
A Areas that may need schools, clinics, roads, or utilities
B The cause of every migration decision
C The exact income of each household
D The future population with certainty
Answer: A. Areas that may need schools, clinics, roads, or utilities. Density maps can help identify where service demand may be concentrated.
10. Why may a high-density neighborhood require careful transport planning?
A Density removes the need for transport
B Every resident works at home
C Many residents share limited street and transit space
D High density guarantees no congestion
Answer: C. Many residents share limited street and transit space. Concentrated populations can increase travel demand, making transit, walking, and street design important.
11. Higher population density can support public transport because it may create what?
A A larger distance between homes and stops
B Enough nearby passengers to sustain frequent service
C No need for routes
D A reduction in travel demand to zero
Answer: B. Enough nearby passengers to sustain frequent service. Dense neighborhoods can place more potential riders near transit routes.
12. Why is high population density sometimes associated with lower per-capita infrastructure cost?
A Each resident requires a separate road system
B Density increases the area served per person
C It removes all maintenance needs
D More residents can share a nearby network or facility
Answer: D. More residents can share a nearby network or facility. Compact settlement can spread fixed infrastructure costs across more users, depending on design and conditions.
13. A dense settlement without adequate sanitation may face which challenge?
A Greater pressure on shared water and waste systems
B No need for public health infrastructure
C A guaranteed decline in disease risk
D An absence of service demand
Answer: A. Greater pressure on shared water and waste systems. When infrastructure does not keep pace with population, shared sanitation and water systems can become strained.
14. How might high density affect the spread of a communicable disease in some settings?
A It prevents all person-to-person contact
B It changes the pathogen’s genome automatically
C Frequent close contact can increase opportunities for transmission
D It guarantees a lower transmission rate
Answer: C. Frequent close contact can increase opportunities for transmission. Crowded conditions can increase contact, though health systems, behavior, and housing also shape outcomes.
15. A density threshold used in urban planning is best understood as what?
A A universal boundary between rural and urban everywhere
B A measure of total population only
C A constant that never depends on context
D A planning indicator defined for a specific purpose
Answer: D. A planning indicator defined for a specific purpose. Thresholds vary by country, planning goal, and measurement method.
16. Why might a rural district’s arithmetic density be low even if one town is crowded?
A The town’s population is excluded from every calculation
B The district average includes extensive lightly populated land
C Density cannot be calculated for rural areas
D The district has no boundary
Answer: B. The district average includes extensive lightly populated land. A district-wide average combines the town with surrounding land, which can lower the overall figure.
17. Which statement about density and quality of life is most accurate?
A Higher density always means a better life
B Lower density always means more congestion
C Density can bring access benefits and pressures, depending on services and planning
D Density alone determines income
Answer: C. Density can bring access benefits and pressures, depending on services and planning. Density can support nearby services while also creating pressure if housing and infrastructure are inadequate.
18. Why might population density be used when locating emergency services?
A It helps estimate where more residents may need rapid access
B It identifies the cause of all hazards
C It replaces road-network analysis
D It measures only building heights
Answer: A. It helps estimate where more residents may need rapid access. Density can help estimate demand, but emergency planning also needs travel times and hazard exposure.
19. How can population density influence the placement of a new school?
A Density automatically identifies each child’s age
B Schools must only be built in the least dense area
C Density replaces distance and access analysis
D Planners may consider how many children live within a service area
Answer: D. Planners may consider how many children live within a service area. Population counts and density can help estimate enrollment and where facilities are accessible.
20. Why should city density be compared using a consistent definition of urban area?
A Density is unaffected by mapped area
B Different boundaries can include or exclude suburbs and change the average
C Population counts are always identical
D Urban boundaries cannot be changed
Answer: B. Different boundaries can include or exclude suburbs and change the average. The boundary chosen affects both population and land area, so comparisons require consistent definitions.
21. A “density gradient” refers to what?
A A change in birth rate over time
B The slope of a mountain range
C A change in population density across space, often from a center outward
D The direction of a migration flow only
Answer: C. A change in population density across space, often from a center outward. A density gradient describes spatial variation, such as declining density with distance from an urban center.
22. Why can remote settlements have low density even when they contain valuable minerals?
A The resource may support only a limited workforce and isolated services
B Minerals always attract the whole national population
C Resource extraction eliminates transport needs
D Mining towns have no residents
Answer: A. The resource may support only a limited workforce and isolated services. A mine can create a localized cluster, but its workforce and supporting services may remain limited.
23. If two cities have the same population but one has three times the built-up land area, which has the lower average urban density?
A The city with less area
B Both have the same density
C Neither density can be calculated
D The city with three times the area
Answer: D. The city with three times the area. With equal population and more land area, the average density is lower.
24. A density value of 1,000 people per km² means what?
A Exactly 1,000 people live in every square kilometre
B An average of 1,000 people for each square kilometre in the defined area
C Every resident lives in one building
D The area contains 1,000 households
Answer: B. An average of 1,000 people for each square kilometre in the defined area. Density is an average ratio and does not imply that residents are evenly spread within each square kilometre.
25. What is the most important caution when reading a national population-density figure?
A It always equals the density of the capital
B It counts farmers only
C It is an average that may conceal regional contrasts
D It has no relationship to land area
Answer: C. It is an average that may conceal regional contrasts. A national mean can hide dense cities alongside sparsely populated regions.