What is a Standard Penetration Test commonly used to assess?
A The age of rock layers
B In-place resistance of soil during borehole investigation
C The depth of a volcano
D The strength of a mineral crystal only
Answer: B. In-place resistance of soil during borehole investigation. The Standard Penetration Test provides an index of soil resistance that helps characterize subsurface conditions.
What does a rock core sample provide?
A A map of surface drainage only
B A list of nearby landslides
C A cylindrical record of rock through a drilled interval
D A measurement of air pressure
Answer: C. A cylindrical record of rock through a drilled interval. Core samples provide material for examining lithology, fractures, weathering, and rock quality.
What is rock quality designation (RQD) based on?
A The color of rock in an outcrop
B The number of minerals in a sample
C The depth to the water table
D The length of sound core pieces recovered from a drilled interval
Answer: D. The length of sound core pieces recovered from a drilled interval. RQD is an index derived from the proportion of intact core pieces above a specified length in a run.
Why can weathered rock be weaker than fresh rock?
A Weathering alters minerals and opens or enlarges fractures
B Weathering always adds cement
C Fresh rock contains more water
D Weathering makes every mineral harder
Answer: A. Weathering alters minerals and opens or enlarges fractures. Weathering can weaken rock by altering minerals, reducing cohesion, and increasing discontinuity effects.
What is compressibility of soil?
A Its ability to reflect light
B Its tendency to decrease in volume under applied stress
C The speed of groundwater flow
D The size of a landslide
Answer: B. Its tendency to decrease in volume under applied stress. Compressibility describes how much soil volume changes when stress is applied.
What is shear strength?
A Resistance to sunlight
B The amount of water in a soil pore
C Resistance to sliding or shearing along a plane
D The depth of a foundation
Answer: C. Resistance to sliding or shearing along a plane. Shear strength is the resistance of soil or rock to sliding failure along a plane.
How can increased pore-water pressure affect soil shear strength?
A It always increases grain friction
B It removes gravity
C It turns soil into bedrock
D It can reduce effective stress and lower resistance to shearing
Answer: D. It can reduce effective stress and lower resistance to shearing. Higher pore pressure reduces the stress carried by the grain framework and can lower shear resistance.
What does a factor of safety for a slope compare?
A Available resisting capacity with driving forces
B The height of a slope with its color
C The water table with rainfall totals
D The age of rock with its grain size
Answer: A. Available resisting capacity with driving forces. A factor of safety compares resisting forces or strength with forces promoting failure.
What does a factor of safety greater than one generally indicate in a simplified slope analysis?
A Failure is certain immediately
B Resisting capacity exceeds driving forces under the assumed conditions
C The slope has no groundwater
D The site is free from all hazards
Answer: B. Resisting capacity exceeds driving forces under the assumed conditions. In a simplified calculation, a value above one indicates modeled resistance exceeds driving demand, but uncertainty and design criteria still matter.
What is a planar rock-slope failure?
A A circular slide in uniform soil
B A rockfall through the air
C Sliding along a discontinuity that daylights toward the slope face
D A river cutting a valley
Answer: C. Sliding along a discontinuity that daylights toward the slope face. Planar failure occurs when a discontinuity dips out of the slope face and provides a potential sliding surface.
What is a wedge failure in a rock slope?
A A single soil layer compresses vertically
B A landslide moves on a circular surface
C A stream erodes a point bar
D A block slides along the line of intersection of two discontinuities
Answer: D. A block slides along the line of intersection of two discontinuities. Wedge failure can occur when two discontinuities intersect and their line of intersection daylights on the slope.
What is toppling failure?
A Rock columns or blocks rotate forward out of a steep slope
B Soil moves along a curved surface
C A river deposits sediment on a floodplain
D Groundwater flows upward through a spring
Answer: A. Rock columns or blocks rotate forward out of a steep slope. Toppling involves forward rotation of columns or blocks, commonly where discontinuities dip steeply into a slope.
Why is drainage often part of landslide mitigation?
A Water always strengthens every slope
B Reducing water and pore pressure can improve slope stability
C Drainage removes all gravity
D It changes the rock type
Answer: B. Reducing water and pore pressure can improve slope stability. Drainage can lower groundwater and pore pressure, reducing one important cause of slope instability.
How can removing material from the toe of a slope affect stability?
A It always stabilizes the slope
B It lowers groundwater everywhere
C It can remove support and increase failure likelihood
D It turns a slide into a fold
Answer: C. It can remove support and increase failure likelihood. Excavating or eroding the toe can debuttress a slope and reduce its stability.
How can adding a heavy fill near the top of a slope affect stability?
A It always reduces stress
B It removes pore pressure
C It prevents landslides completely
D It can increase driving forces and slope loading
Answer: D. It can increase driving forces and slope loading. Loading the slope crest can add driving stress and contribute to instability.
What is a cut slope?
A A slope created by excavating into natural ground
B A natural riverbank only
C A glacial moraine
D A groundwater recharge zone
Answer: A. A slope created by excavating into natural ground. Cut slopes are excavated faces made for roads, buildings, or other infrastructure.
Why should a road cut be evaluated for bedding and joint orientation?
A They determine the road’s paint color
B Discontinuities may daylight and form potential sliding blocks
C They prevent weathering
D They have no effect on slope stability
Answer: B. Discontinuities may daylight and form potential sliding blocks. The orientation of bedding and joints relative to the cut face can control block release and sliding.
What is expansive soil?
A Soil that contains no clay minerals
B A soil that is always saturated
C Soil that can swell or shrink significantly with moisture changes
D A type of clean gravel
Answer: C. Soil that can swell or shrink significantly with moisture changes. Some clay-rich soils expand when wet and shrink when dry, causing ground movement.
What is collapsible soil?
A Soil that becomes stronger when saturated in every case
B A dense rock that cannot deform
C A layer of groundwater
D Soil that can undergo sudden settlement when wetted or loaded
Answer: D. Soil that can undergo sudden settlement when wetted or loaded. Some loose, dry soils can collapse and settle when wetted or subjected to load.
Why can compressible clay cause foundation settlement?
A It can slowly consolidate as water is squeezed from its pores under load
B It contains no pore water
C It cannot be loaded
D It is always stronger than bedrock
Answer: A. It can slowly consolidate as water is squeezed from its pores under load. Fine-grained clay can consolidate over time under load as pore water drains and the soil skeleton compresses.
What is consolidation?
A The melting of rock under a foundation
B Time-dependent volume reduction as pore water drains from saturated soil under load
C A process that forms a fault
D A type of groundwater recharge
Answer: B. Time-dependent volume reduction as pore water drains from saturated soil under load. Consolidation is gradual compression of saturated soil as excess pore pressure dissipates and water drains.
Why can a high water table complicate excavation?
A It prevents all soil movement
B It makes rock stronger automatically
C It can cause inflow, instability, or the need for dewatering
D It removes the need for a foundation
Answer: C. It can cause inflow, instability, or the need for dewatering. High groundwater can enter excavations and affect stability, construction methods, and surrounding settlement.
What is dewatering?
A Adding water to a slope
B Filling a well with sediment
C A method of identifying fossils
D Lowering groundwater to enable construction or control seepage
Answer: D. Lowering groundwater to enable construction or control seepage. Dewatering removes or lowers groundwater in an excavation, often using wells or drains.
What can excessive dewatering near buildings cause?
A Settlement if compressible soils compact as groundwater levels fall
B A new volcanic eruption
C Increased river baseflow everywhere
D A fold in the foundation
Answer: A. Settlement if compressible soils compact as groundwater levels fall. Lowering groundwater can increase effective stress and compact compressible sediments, causing settlement.
Why are faults important in tunnel planning?
A They always make tunneling safer
B They may contain weak rock, crushed material, or groundwater pathways
C They stop groundwater flow completely
D They determine the tunnel’s paint color
Answer: B. They may contain weak rock, crushed material, or groundwater pathways. Fault zones can contain fractured or weak rock and can transmit water, affecting tunnel support and construction.