Water enters a crack and freezes when temperatures fall below the freezing point. Ice expansion can press against the crack walls; repeated freeze and thaw cycles gradually widen the joint and loosen fragments.
Roots widen rock cracks
Plant roots can enter pre-existing openings in rock. As roots grow thicker, they exert pressure on the crack walls, widening fractures and sometimes separating blocks without changing the minerals chemically.
Crystals grow in pores
Saline water can move into pores and fractures, then evaporate. Salt crystals grow during drying and can exert pressure on pore walls, gradually loosening grains and producing cavities or honeycomb textures.
Breaking rock into pieces
Mechanical weathering disintegrates rock into smaller fragments while leaving most mineral chemistry unchanged. It increases exposed surface area, which can make later chemical reactions more effective. This distinction separates it from chemical alteration.
Clay minerals
During hydrolysis, water reacts with silicate minerals such as feldspar. Some original ions are removed in solution while new, softer clay minerals form, helping the rock become weaker and more crumbly.
Iron-bearing minerals
Oxidation involves reactions with oxygen and is common in iron-bearing minerals. It can form iron oxides that stain rock reddish or yellowish and can weaken the original mineral framework. This process does not itself transport the material.
Carbonic acid
Carbon dioxide dissolves in water to form weak carbonic acid. This acidic water reacts with calcite and carries dissolved material away, so carbonation is especially important in limestone and other carbonate rocks.
Curved outer sheets peeling
Exfoliation describes the peeling or separation of curved outer rock sheets roughly parallel to the surface. Pressure release and other stress changes can contribute, exposing fresh surfaces to further weathering.
Coarse granitic sand
Grus is loose, coarse granular material produced as granite disintegrates. Quartz and feldspar grains often remain recognizable, and wind or water can carry the particles away from the outcrop. It often collects at the base of granite outcrops.
Honeycomb-like rock hollows
Tafoni are small rounded cavities that can enlarge through focused weathering. Moisture and salts may accumulate in sheltered pockets, while more resistant surface bands remain as ridges between hollows. These textures occur on some sandstone and granite surfaces.
Rounded blocks
Water and chemical reactions commonly reach a jointed block along its corners and edges. These parts weather faster, so the remaining rock becomes progressively rounded as surrounding altered material is removed.
Water dissolves soluble minerals
Solution is chemical weathering in which water removes soluble mineral compounds. The dissolved load is carried in water, so this process can enlarge openings in rocks such as limestone, gypsum, or halite.
Thermal expansion and contraction
Minerals expand and contract as temperature changes, and different minerals may respond by different amounts. Repeated stress can loosen grains and promote surface cracking, especially where daily temperature ranges are large.
Organic acids
Lichens attach to rock surfaces and can release organic acids as they grow. These acids react with minerals and help loosen particles, while the organism also shelters moisture against the rock.
Water and freeze-thaw cycles occur
Frost wedging needs water to enter pores or cracks and temperatures to move through freezing and thawing conditions. Repeated cycles can gradually enlarge openings and detach rock fragments. Its effectiveness depends on available water and temperature range.
Loose surface mantle
Regolith is the loose, weathered material that overlies solid bedrock. It may include soil, weathered rock, sediment, and other unconsolidated material formed in place or moved onto the surface. Thickness and composition vary with local conditions.