Mass Wasting — Short Notes

Downslope rock and soil movement

  • Mass wasting is the gravity-driven downslope movement of rock and soil. It includes slow creep as well as rapid landslides, falls, and flows.

Gravity

  • Gravity pulls slope material downslope. Water, earthquakes, and human changes may trigger or assist movement, but gravity remains the direct driving force.

Rockfall

  • Rockfalls involve fragments detaching from steep slopes and falling, bouncing, or rolling downslope. They commonly leave angular debris near the cliff base.

Creep

  • Creep is very slow, steady downslope movement of slope-forming soil or rock. It can be difficult to notice until fences, trees, or buildings become displaced.

Rotational slump

  • A slump is a rotational slide. Its moving mass follows a curved surface and commonly tilts backward as it moves downslope.

Debris flow

  • A debris flow is a fast-moving mixture of water-saturated sediment and rock. It can behave like wet concrete and travel down slopes or channels.

Intense rainfall

  • Heavy rainfall can saturate slope materials and alter stresses within them. It is a common trigger, though landslides also have other natural and human causes.

Talus slope

  • Rock fragments that fall from a steep cliff often accumulate at its base as talus. These deposits are commonly coarse and angular.

Translational

  • A translational slide moves along a roughly planar surface, with little rotation. Weak bedding planes or other continuous zones can guide this movement.

Rotation about a pivot

  • A topple rotates forward or outward around a pivot or base before falling. A simple fall mainly moves through the air, then may bounce or roll.

Frozen ground

  • Solifluction is slow downslope flow of water-saturated soil over frozen or otherwise impermeable ground. It is common in cold environments with seasonal thaw.

Colluvium

  • Colluvium is loose, often poorly sorted material accumulated on or near slopes through gravity-driven movement and related slope processes.

Stream erosion

  • Stream erosion can undercut a slope toe and reduce support. The overlying material may then become unstable, especially when combined with rain or weak layers.

Binding soil

  • Roots may reinforce near-surface soil and reduce erosion. Their effect depends on slope conditions; vegetation cannot prevent every landslide.

Earthquake

  • Earthquake shaking can trigger landslides and rockfalls, particularly where slopes or materials are already susceptible to failure.

Rock, debris, or earth

  • Landslides include downslope movement of rock, debris, or earth. Geologists describe them by both the material involved and how it moves.