Answer: A. Particle it can move. Competence is the maximum particle size a stream can transport under given flow conditions.
A stream’s sediment capacity is the:
A Largest grain moved
B Channel width only
C Total load it carries
D Water depth only
Answer: C. Total load it carries. Capacity is the total quantity of sediment a stream can transport, unlike competence, which concerns particle size.
A channel is 18 km long while its valley is 12 km long. Its sinuosity is:
A 0.67
B 1.0
C 1.5
D 2.0
Answer: C. 1.5. Sinuosity equals channel length divided by valley length: 18 ÷ 12 = 1.5.
A river cross-section covers 5 m² and mean velocity is 3 m/s. Discharge is:
A 15 m³/s
B 8 m³/s
C 12 m³/s
D 18 m³/s
Answer: A. 15 m³/s. Discharge is cross-sectional area multiplied by mean velocity: 5 × 3 = 15 cubic metres per second.
A basin has 60 km of channels across 20 km². Drainage density is:
A 0.3 km/km²
B 2 km/km²
C 6 km/km²
D 3 km/km²
Answer: D. 3 km/km². Drainage density is total channel length divided by basin area: 60 ÷ 20 = 3 kilometres per square kilometre.
In channel hydraulics, hydraulic radius equals flow area divided by:
A Wetted perimeter
B Channel length
C Basin area
D Water-surface width
Answer: A. Wetted perimeter. Hydraulic radius is the cross-sectional flow area divided by the wetted perimeter.
A river falls 24 m over a 6 km reach. Its average gradient is:
A 2 m/km
B 6 m/km
C 12 m/km
D 4 m/km
Answer: D. 4 m/km. Average gradient is elevation change divided by reach length: 24 metres ÷ 6 kilometres = 4 metres per kilometre.
With channel slope unchanged, doubling discharge generally doubles stream power per unit length because power is proportional to:
A Width times depth
B Grain size alone
C Basin area only
D Discharge times slope
Answer: D. Discharge times slope. Total stream power per unit channel length is proportional to water density, gravity, discharge, and channel slope.
An abrupt break in a river’s longitudinal profile is a:
A Point bar
B Flood basin
C Knickpoint
D Interfluve
Answer: C. Knickpoint. A knickpoint is a relatively abrupt change in channel gradient, such as a waterfall or steep reach.
A sustained fall in base level commonly encourages upstream:
A Channel incision
B Delta progradation
C Levee growth
D Point-bar deposition
Answer: A. Channel incision. Lowering base level steepens the river profile relative to its outlet and can promote incision upstream.
Headward erosion that diverts a neighboring stream is called:
A Avulsion
B Stream capture
C Aggradation
D Meander cutoff
Answer: B. Stream capture. Stream capture occurs when one drainage network intercepts flow from an adjacent basin, often through headward erosion.
After stream capture, the abandoned dry valley is a:
A Water gap
B Wind gap
C River mouth
D Flood basin
Answer: B. Wind gap. A wind gap is a dry valley left when a stream that once occupied it is diverted or captured.
The sharp bend where captured flow changes direction is an:
A Oxbow lake
B Meander scroll
C Crevasse splay
D Elbow of capture
Answer: D. Elbow of capture. An elbow of capture marks the abrupt change in channel course where stream piracy redirects flow.
A deeply incised meander preserved during rapid downcutting is an:
A Entrenched meander
B Braided reach
C Natural levee
D Delta lobe
Answer: A. Entrenched meander. Entrenched meanders retain a winding planform while a river cuts deeply into bedrock, often after uplift or rejuvenation.
A graded stream has adjusted toward balance between sediment supply and:
A Basin perimeter
B Transport capacity
C Rainfall duration
D Bank vegetation
Answer: B. Transport capacity. A graded stream tends toward a balance in which flow can transport the sediment supplied to it.
Net deposition that raises a riverbed is:
A Degradation
B Abrasion
C Aggradation
D Headward erosion
Answer: C. Aggradation. Aggradation is bed-level rise caused by net sediment deposition.
Net erosion that lowers a riverbed is:
A Aggradation
B Avulsion
C Degradation
D Lateral accretion
Answer: C. Degradation. Degradation is the lowering of a channel bed through net erosion.
A meander bend migrates downstream partly because erosion is stronger on its:
A Upstream inner bank
B Downstream outer bank
C Floodplain center
D Levee crest
Answer: B. Downstream outer bank. In a meander, erosion is more effective on the downstream side of the bend, helping it migrate down-valley.
A tributary adds 12 m³/s to a river carrying 30 m³/s. Combined discharge is:
A 18 m³/s
B 30 m³/s
C 42 m³/s
D 360 m³/s
Answer: C. 42 m³/s. Ignoring short-term storage and losses, flows combine at the confluence: 30 + 12 = 42 cubic metres per second.
A typical graded river’s long profile is generally:
A Straight and vertical
B Concave upward
C Convex upward
D Perfectly horizontal
Answer: B. Concave upward. A river’s longitudinal profile commonly becomes gentler downstream, producing a concave-up shape.
Why do cohesive clay particles require relatively high velocity for initial erosion?
A Low particle density
B Electrochemical cohesion
C Large grain diameter
D Weak grain bonding
Answer: B. Electrochemical cohesion. Fine clay particles can resist initial detachment because electrochemical attraction makes them cohesive.
During overbank flooding, sediment generally becomes finer farther from the channel because:
A Fine grains settle first
B Water speeds up outward
C All grains dissolve
D Coarse grains settle first
Answer: D. Coarse grains settle first. As floodwater spreads and slows, coarser particles tend to settle nearer the channel while finer sediment travels farther.
A channel’s floodplain is commonly widened by lateral migration and:
A Overbank deposition
B Glacial plucking
C Wind deflation
D Coastal wave action
Answer: A. Overbank deposition. Floodplains grow through channel migration and sediment deposition when water overtops the banks.
Stream frequency is calculated as stream-segment count divided by:
A Channel depth
B Valley length
C Sediment volume
D Basin area
Answer: D. Basin area. Stream frequency measures the number of stream segments per unit drainage-basin area.
The lowest elevation to which a stream can erode its channel is its:
A Base level
B Meander belt
C Drainage divide
D Channel head
Answer: A. Base level. Base level is the lowest elevation to which a stream can erode, commonly controlled by its outlet or a local barrier.