A sample has mass 3 kg and volume 0.002 m³. What is its density?
A 1500 kg/m³
B 600 kg/m³
C 150 kg/m³
D 6000 kg/m³
Answer: A. 1500 kg/m³. Density is m/V = 3/0.002 = 1500 kg/m³.
A 100 N force is distributed uniformly over 0.5 m². What pressure does it produce?
A 50 Pa
B 200 Pa
C 500 Pa
D 2000 Pa
Answer: B. 200 Pa. Pressure is F/A = 100/0.5 = 200 Pa.
What is the gauge pressure 2 m below water? Use ρ = 1000 kg/m³ and g = 10 m/s².
A 2 kPa
B 5 kPa
C 20 kPa
D 200 kPa
Answer: C. 20 kPa. p = ρgh = 1000 × 10 × 2 = 20,000 Pa, or 20 kPa.
What is the gauge pressure 5 m below water? Use ρ = 1000 kg/m³ and g = 10 m/s².
A 5 kPa
B 25 kPa
C 500 kPa
D 50 kPa
Answer: D. 50 kPa. p = 1000 × 10 × 5 = 50,000 Pa, or 50 kPa.
A hydraulic lift has piston areas 0.02 m² and 0.5 m². If 100 N is applied to the smaller piston, what ideal force acts on the larger piston?
A 2500 N
B 100 N
C 500 N
D 25,000 N
Answer: A. 2500 N. Both pistons have the same pressure: 100/0.02 = 5000 Pa; multiplying by 0.5 m² gives 2500 N.
A pressure of 20 kPa acts on a piston of area 0.01 m². What force acts on the piston?
A 20 N
B 200 N
C 2 N
D 2000 N
Answer: B. 200 N. F = pA = 20,000 × 0.01 = 200 N.
A submerged object displaces 0.003 m³ of water. Use ρ = 1000 kg/m³ and g = 10 m/s². Find the buoyant force.
A 3 N
B 15 N
C 30 N
D 300 N
Answer: C. 30 N. The buoyant force equals the displaced water weight: 1000 × 0.003 × 10 = 30 N.
A block floats at rest and weighs 50 N. What is the buoyant force on it?
A 25 N
B 100 N
C Zero
D 50 N
Answer: D. 50 N. For a floating body in vertical equilibrium, buoyant force equals weight.
An object of density 600 kg/m³ has volume 0.002 m³. Use g = 10 m/s². What is its weight?
A 12 N
B 1.2 N
C 6 N
D 120 N
Answer: A. 12 N. Its mass is ρV = 600 × 0.002 = 1.2 kg, so its weight is 1.2 × 10 = 12 N.
A water manometer shows a 0.2 m height difference. Use ρ = 1000 kg/m³ and g = 10 m/s². What pressure difference does this indicate?
A 200 Pa
B 2000 Pa
C 5000 Pa
D 20,000 Pa
Answer: B. 2000 Pa. The pressure difference is ρgh = 1000 × 10 × 0.2 = 2000 Pa.
What is the gauge pressure 3 m below oil of density 800 kg/m³? Use g = 10 m/s².
A 2.4 kPa
B 8 kPa
C 24 kPa
D 240 kPa
Answer: C. 24 kPa. p = ρgh = 800 × 10 × 3 = 24,000 Pa, or 24 kPa.
The diameter of a hydraulic press output piston is doubled while the input piston is unchanged. What happens to the ideal output force for the same input force?
A It doubles
B It halves
C It stays the same
D It becomes four times as large
Answer: D. It becomes four times as large. Piston area is proportional to diameter squared, so doubling diameter makes output area and force four times larger.
Water flows at 3 m/s through a section of area 4 cm², then enters a 12 cm² section. What is its speed in the larger section?