Fluid mechanics studies…
A Only soil compaction
B Fluids at rest and motion
C Only solid fracture
D Only heat conduction
Answer: B. Fluids at rest and motion. Fluid mechanics describes fluid properties, statics and motion.
A fluid continuously deforms under…
A Hydrostatic pressure only
B Applied shear stress
C Zero force
D Uniform temperature
Answer: B. Applied shear stress. A fluid cannot sustain a shear stress without continuous deformation.
Density is…
A Weight per unit area
B Volume per unit mass
C Mass per unit volume
D Force per unit length
Answer: C. Mass per unit volume. Density ρ is mass divided by volume.
Specific weight is…
A Weight per unit volume
B Mass per unit area
C Volume per unit weight
D Pressure per length
Answer: A. Weight per unit volume. Specific weight γ is weight divided by volume.
Specific gravity compares density with…
A Air pressure
B Water density
C Steel density
D Mercury viscosity
Answer: B. Water density. Specific gravity is the ratio of a substance’s density to a reference density, commonly water.
Dynamic viscosity measures resistance to…
A Compression only
B Shearing flow
C Buoyancy
D Thermal expansion
Answer: B. Shearing flow. Dynamic viscosity quantifies a fluid’s resistance to shear deformation.
Kinematic viscosity equals dynamic viscosity divided by…
A Density
B Specific weight
C Pressure
D Surface tension
Answer: A. Density. Kinematic viscosity ν = μ/ρ.
Pressure is normal force divided by…
A Volume
B Length
C Density
D Area
Answer: D. Area. Pressure is the normal force acting per unit area.
In a static fluid, pressure generally increases with…
A Distance sideways only
B Surface tension only
C Depth below free surface
D Temperature decrease
Answer: C. Depth below free surface. Hydrostatic pressure increases with depth due to the weight of fluid above.
Pascal’s law applies pressure equally through…
A A confined fluid
B A solid beam only
C A vacuum only
D A free jet only
Answer: A. A confined fluid. A pressure change applied to a confined fluid is transmitted throughout the fluid.
Gauge pressure equals absolute pressure minus…
A Atmospheric pressure
B Vapor pressure
C Dynamic pressure
D Hydrostatic head
Answer: A. Atmospheric pressure. Gauge pressure uses local atmospheric pressure as its zero reference.
A streamline is everywhere tangent to…
A Pressure gradient only
B Acceleration vector always
C Boundary shear only
D Instantaneous velocity
Answer: D. Instantaneous velocity. The local fluid velocity vector is tangent to a streamline.
Steady flow means properties at a point…
A Do not vary in space
B Are always zero
C Change periodically
D Do not change with time
Answer: D. Do not change with time. In steady flow, fluid properties at a fixed location remain constant over time.
Uniform flow means properties do not vary with…
A Time at one point
B Fluid density
C Position along flow
D Boundary pressure only
Answer: C. Position along flow. Uniform flow has no spatial variation along the direction considered.
Volumetric discharge is…
A Pressure times area
B Area times average speed
C Density times head
D Viscosity times length
Answer: B. Area times average speed. For a section with average velocity V, discharge Q = AV.
For incompressible steady flow, continuity requires…
A Pressure stays constant
B Q stays constant
C Velocity stays constant
D Area stays constant
Answer: B. Q stays constant. Mass conservation gives constant volume flow rate for incompressible steady flow.
Bernoulli’s equation expresses conservation of…
A Mass per area
B Shear stress
C Heat capacity
D Mechanical energy per weight
Answer: D. Mechanical energy per weight. Bernoulli’s equation relates pressure, elevation and velocity heads under ideal assumptions.
The hydraulic grade line represents…
A Elevation plus velocity head
B Pressure plus friction loss
C Velocity head only
D Elevation plus pressure head
Answer: D. Elevation plus pressure head. HGL equals elevation head plus pressure head.
The energy grade line lies above HGL by…
A Velocity head
B Pressure head
C Friction factor
D Pipe diameter
Answer: A. Velocity head. EGL includes velocity head in addition to the hydraulic grade line.
Buoyant force equals displaced fluid…
A Mass times velocity
B Pressure times depth
C Weight
D Viscosity times area
Answer: C. Weight. Archimedes’ principle states buoyancy equals the weight of displaced fluid.
A Newtonian fluid has shear stress proportional to…
A Fluid depth only
B Pressure squared
C Rate of shear strain
D Surface area only
Answer: C. Rate of shear strain. For a Newtonian fluid, shear stress is proportional to velocity gradient.
Surface tension acts along a liquid…
A Free surface
B Pipe centerline
C Solid interior
D Pressure sensor
Answer: A. Free surface. Surface tension arises from molecular forces at a liquid interface.
Capillary rise in a narrow tube is driven by…
A Surface tension and wetting
B Gravity alone
C Turbulence only
D Pipe friction only
Answer: A. Surface tension and wetting. Surface tension and contact angle cause capillary rise or depression.
An incompressible fluid has approximately constant…
A Viscosity at all temperatures
B Pressure everywhere
C Velocity everywhere
D Density
Answer: D. Density. Incompressible-flow modeling assumes density changes are negligible.
A manometer measures pressure using…
A Wheel rotations
B Laser travel time
C Fluid-column height difference
D Surface wave speed
Answer: C. Fluid-column height difference. A manometer relates pressure difference to hydrostatic head in a liquid column.