Water Pollution — Short Notes
Trace contaminant sources and pathways, interpret water-quality indicators and compare prevention and treatment.
1. Sources and pathways
- Point sources discharge from identifiable outlets such as pipes; non-point sources arrive diffusely through runoff or atmospheric deposition.
- Domestic sewage, industry, agriculture, mining, urban runoff and waste disposal can introduce different contaminants.
- Groundwater can be contaminated by leaching from the land surface or by saltwater intrusion where pumping alters coastal aquifers.
- A pollutant’s source, transport route and receiving water determine exposure and control options.
2. Types of contaminants
- Physical pollution includes suspended solids, heat and plastics; chemical pollution includes nutrients, metals, salts and organic compounds.
- Pathogens in untreated sewage or contaminated runoff can create infectious-disease risks.
- Excess nitrogen or phosphorus can stimulate algal growth and change oxygen conditions in lakes, rivers or coastal waters.
- Toxicity depends on concentration, chemical form, exposure duration and organism sensitivity.
3. Dissolved oxygen and organic load
- Dissolved oxygen (DO) is oxygen available in water for aquatic organisms; temperature, mixing and biological activity affect it.
- Biochemical oxygen demand (BOD) estimates oxygen used by microorganisms as they decompose biodegradable material under defined test conditions.
- High organic loading can increase oxygen demand and lower DO, especially where water mixing is limited.
- Chemical oxygen demand (COD) estimates chemically oxidizable material and is not interchangeable with BOD.
4. Eutrophication and ecosystem effects
- Nutrient enrichment can produce algal blooms; decomposition of biomass may lower dissolved oxygen and cause stress or fish kills.
- Some blooms produce toxins, while many do not; appearance alone cannot identify a bloom’s risk.
- Sediment, salinity and temperature changes can also alter aquatic habitats and species communities.
- Effects can move through food webs and affect drinking-water sources, fisheries and recreation.
5. Water-quality assessment
- Indicators include temperature, pH, turbidity, conductivity, DO, BOD, nutrients, microbes and specific chemicals.
- Sampling location, depth, timing and preservation affect results; compare like with like.
- A single indicator rarely describes overall water quality; select measurements for the intended use or concern.
- Watershed monitoring helps connect a measured change to upstream land use and sources.
6. Prevention and treatment
- Prevent pollution by reducing sources, improving sanitation, controlling runoff and safely handling chemicals and waste.
- Wastewater treatment commonly uses physical separation and biological processes; advanced stages target additional nutrients or contaminants.
- Wetlands and vegetated buffers can intercept some runoff and support ecological functions, but they do not replace source control.
- Protecting groundwater and surface water requires maintenance, monitoring and appropriate regulation.
Quick revision table
| Indicator | What it indicates | Interpretation |
|---|---|---|
| DO | Oxygen available in water | Low values can stress aquatic life |
| BOD | Microbial oxygen demand for biodegradable material | Higher BOD can signal more organic loading |
| Turbidity | Cloudiness from suspended material | Can reduce light and affect treatment |
| Nutrients | Nitrogen or phosphorus availability | Excess can promote eutrophication |