Renewable Energy MCQs (Set-2)

Difficulty: Easy & Basic

Why are inverters used in many solar PV systems?

A They store sunlight for winter
B They convert the panels’ direct-current electricity into alternating current for typical grid use
C They store sunlight for winter
D They store sunlight for winter

In a wind turbine, rotor blades capture wind energy mainly through:

A Friction against the tower
B Friction against the tower
C Aerodynamic forces that cause the rotor to turn
D Friction against the tower

Why can a turbine shut down during extremely high winds?

A Because high winds contain no energy
B Because high winds contain no energy
C Because high winds contain no energy
D To protect the machine from excessive mechanical loads

Which hydropower facility stores water behind a dam before release?

A An impoundment facility
B A geothermal heat pump
C A geothermal heat pump
D A geothermal heat pump

A diversion or run-of-river hydropower system generally:

A Burns fuel inside the river channel
B Directs part of a river’s flow through a canal or penstock to turbines
C Burns fuel inside the river channel
D Burns fuel inside the river channel

Why is pumped-storage hydropower considered storage rather than a primary energy source?

A It creates water from sunlight
B It creates water from sunlight
C It uses electricity to pump water uphill and later returns part of that energy
D It creates water from sunlight

A geothermal heat pump differs from a geothermal power plant because a heat pump:

A Burns geothermal fluid
B Burns geothermal fluid
C Burns geothermal fluid
D Exchanges heat with shallow ground for building heating or cooling

Which material can be used as a biomass feedstock?

A Agricultural residues
B Uranium fuel rods
C Uranium fuel rods
D Uranium fuel rods

Why is renewable electricity called variable when it depends on sunlight or wind?

A Electricity cannot be stored
B The natural resource changes with weather, time, and location
C Electricity cannot be stored
D Electricity cannot be stored

A capacity factor compares:

A Battery mass with wind speed
B Battery mass with wind speed
C Actual energy produced over a period with maximum possible output at rated capacity
D Battery mass with wind speed

Why can a renewable plant’s rated capacity differ from its annual electricity generation?

A All renewable plants run continuously at full output
B All renewable plants run continuously at full output
C All renewable plants run continuously at full output
D Its output depends on resource availability and operating conditions

What is one reason wind resources vary across a landscape?

A Terrain, vegetation, and nearby water can alter wind patterns
B Wind speed is identical everywhere
C Wind speed is identical everywhere
D Wind speed is identical everywhere

Why can wind projects require transmission planning?

A Electricity cannot travel over power lines
B The strongest wind resource may be far from major electricity demand
C Electricity cannot travel over power lines
D Electricity cannot travel over power lines

What is one environmental consideration for hydropower dams?

A An increase in wind speed only
B An increase in wind speed only
C Changes to river flow and aquatic habitat
D An increase in wind speed only

Why can fish passage be considered at some hydropower projects?

A Fish generate electricity for turbines
B Fish generate electricity for turbines
C Fish generate electricity for turbines
D Dams or structures may obstruct fish movement along rivers

Binary-cycle geothermal plants use a heat exchanger to:

A Transfer geothermal heat to a separate working fluid that drives a turbine
B Send geothermal brine directly through every turbine
C Send geothermal brine directly through every turbine
D Send geothermal brine directly through every turbine

Why is geothermal resource assessment site-specific?

A Geology does not affect geothermal energy
B Usable heat, fluid, permeability, and drilling conditions vary by location
C Geology does not affect geothermal energy
D Geology does not affect geothermal energy

Biomass combustion produces useful energy by:

A Converting wind directly into electricity
B Converting wind directly into electricity
C Releasing stored chemical energy as heat
D Converting wind directly into electricity

Why should biofuel feedstocks be evaluated for land-use effects?

A Crops cannot affect ecosystems
B Crops cannot affect ecosystems
C Crops cannot affect ecosystems
D Growing energy crops can compete with food, habitat, or other land uses

Why can biogas systems be useful for some organic wastes?

A They capture methane-rich gas from controlled anaerobic decomposition
B They turn metals into fuel
C They turn metals into fuel
D They turn metals into fuel

A hybrid renewable system may combine:

A Only two fossil-fuel boilers
B Two or more sources such as solar, wind, and storage
C Only two fossil-fuel boilers
D Only two fossil-fuel boilers

Demand response helps grid integration by:

A Changing renewable resources into fuels
B Changing renewable resources into fuels
C Shifting or reducing electricity use in response to system conditions
D Changing renewable resources into fuels

What is curtailment of renewable generation?

A Converting a solar panel into a battery
B Converting a solar panel into a battery
C Converting a solar panel into a battery
D Reducing available output when the grid cannot use or transmit all of it

Why can batteries support renewable integration?

A They can store electricity and discharge it later
B They make the wind blow
C They make the wind blow
D They make the wind blow

Why is lifecycle analysis useful when comparing renewable technologies?

A It excludes manufacturing impacts
B It considers impacts from materials, construction, operation, and end-of-life
C It excludes manufacturing impacts
D It excludes manufacturing impacts