Controlling: Measuring Results and Correcting Course

Business and Management · Study Guide

Controlling: Measuring Results and Correcting Course

Use standards, evidence and corrective action to keep work aligned with objectives.

Introduction

In management, controlling is the process of checking whether actual performance is moving toward agreed objectives and deciding what to do when it is not. It is not simply surveillance: useful control makes performance visible, supports timely correction and improves future plans.

1. Set Useful Standards and Measures

1. Connect measures to objectives

Standards can describe output, quality, cost, time, safety or service. Choose a small set that reflects the objective rather than rewarding one narrow number.

2. Define a baseline and target

A baseline shows current performance; a target states the intended level and time frame. Record the data source and how often it will be reviewed.

3. Balance leading and lagging indicators

Lagging measures report outcomes already achieved, such as defects. Leading indicators track conditions that may shape future results, such as preventive maintenance completion.

2. Measure, Compare and Diagnose

4. Collect reliable evidence

Use consistent definitions, complete records and appropriate sampling. Check whether the data is timely and accurate before treating a variance as meaningful.

5. Compare actual results with standards

A variance is the difference between an expected and an actual result. Its size, direction and pattern help determine whether investigation is needed.

6. Find the cause, not only the symptom

Ask whether a gap reflects process design, training, capacity, equipment, external change or unrealistic targets. Involve people closest to the work.

3. Correct, Learn and Improve

7. Choose proportionate action

Corrective action may change a process, resource, schedule or target. Assign an owner and a review date, and consider unintended effects.

8. Use control at different stages

Feedforward checks reduce problems before work begins; concurrent checks identify issues during work; feedback control uses results after completion.

9. Close the learning loop

Document what changed and whether it worked. Continuous improvement methods such as the Plan–Do–Check–Act cycle connect performance reviews with new plans.

4. Quick Revision

ConceptRevision cue
StandardExpected level or condition
MeasureObserved result
VarianceGap from the target
ActionChange and follow-up

Study cue: Align with objective; Check data quality; Diagnose its cause; Review whether it worked

Conclusion

Good control gives an organisation a fair way to see whether work is on track and to respond before small gaps become larger problems. Measures should inform judgment, not replace it.