Construction Materials and Building Technology MCQs (Set-1)

What is the main role of cement in ordinary concrete?

A Replaces coarse aggregate
B Binds the ingredients
C Measures slump
D Prevents all cracking

What is cement hydration?

A Chemical reaction with water
B Aggregate grading
C Steel corrosion
D Brick firing

Which material is commonly a fine aggregate?

A Sand
B Coarse gravel
C Reinforcing bar
D Roof tile

Which property is concrete commonly strongest in?

A Direct tension
B Impact only
C Compression
D Torsion only

Why is steel reinforcement used in concrete?

A Raises water-cement ratio
B Measures workability
C Replaces cement hydration
D Carries tensile force

How is water-cement ratio calculated by mass?

A Water mass over cement mass
B Cement mass divided by aggregate
C Water volume times cement
D Aggregate mass divided by water

What does a concrete slump test indicate?

A Hardened steel strength
B Brick absorption only
C Cement fineness
D Fresh-concrete consistency

Why is fresh concrete cured?

A Increase aggregate size
B Remove all water
C Support hydration and strength gain
D Change cement type

What is concrete segregation?

A Uniform cement hydration
B Steel yielding
C Separation of mix constituents
D Brick efflorescence

What is bleeding in fresh concrete?

A Aggregate settling only
B Water rising to surface
C Cement turning to steel
D Concrete freezing

What is mortar generally made from?

A Binder, sand and water
B Coarse rock and steel
C Bitumen and gravel
D Timber and glass

What is a common masonry brick material?

A Cast iron
B Fired clay
C Bitumen
D Reinforcing steel

Which property makes structural steel useful in tension?

A High water absorption
B Brittleness only
C Ductility
D Low thermal conductivity

What is a common natural building stone?

A Granite
B Polyethylene
C Gypsum board
D Bitumen

What is a common characteristic of timber?

A Isotropic liquid behavior
B Zero moisture response
C No grain structure
D Directional material properties

What is a common building use of glass?

A Reinforcing concrete
B Glazing openings
C Soil stabilization
D Pipe backfill

What is bitumen commonly used for?

A Concrete reinforcement
B Masonry mortar sand
C Asphalt pavement binder
D Window glazing

What is a damp-proof course intended to limit?

A Steel yielding
B Moisture rising through walls
C Concrete slump
D Roof live load

What does a lintel support?

A Roof drainage only
B Foundation soil
C Floor finish
D Wall above an opening

What is a building foundation's main role?

A Transfer loads to ground
B Provide window glazing
C Measure cement setting
D Reduce room humidity only

What is formwork used for?

A Shape and support fresh concrete
B Test steel corrosion
C Measure elevation
D Cure bricks

What does modular coordination help standardize?

A Concrete color
B Soil bearing capacity
C Steel chemistry
D Building component dimensions

What does concrete durability describe?

A Slump height only
B Initial color
C Resistance to deterioration
D Aggregate size only

What does supplementary cementitious material do in concrete?

A Acts only as coarse aggregate
B Contributes to binder performance
C Replaces all water
D Measures setting time

What is a common building roof function?

A Carry foundation loads only
B Measure soil moisture
C Control cement hydration
D Shelter from weather