A distribution has class frequencies 12, 15, 8, and 5. What is the total?
A 35
B 30
C 45
D 40
Answer: D. 40. Adding the class frequencies gives 12 plus 15 plus 8 plus 5, or 40.
A class frequency is 18 in a total of 72. What is its relative frequency?
A 25%
B 18%
C 40%
D 54%
Answer: A. 25%. The relative frequency is 18 divided by 72, or 25%.
Frequencies are 6, 9, and 5. What is cumulative frequency through class two?
A 9
B 15
C 11
D 20
Answer: B. 15. Add the first two frequencies: 6 plus 9 equals 15.
An interval spans 25 to 35. What is its width?
A 25
B 35
C 10
D 60
Answer: C. 10. The class width is 35 minus 25, which equals 10.
What is the class mark for limits 25 and 35?
A 25
B 35
C 60
D 30
Answer: D. 30. The class mark is (25 plus 35) divided by two, or 30.
For whole-number values 20–29, what is the upper boundary?
A 29.5
B 29
C 20.5
D 30.5
Answer: A. 29.5. Adding 0.5 to the upper limit gives the continuous boundary 29.5.
Frequencies total 200. A class contains 50 observations. What is its share?
A 20%
B 25%
C 50%
D 75%
Answer: B. 25%. The class share is 50 divided by 200, multiplied by 100.
Which class rule avoids assigning a boundary value twice?
A Include every upper limit
B Repeat the boundary in both
C Use exclusive upper limits
D Leave all limits unstated
Answer: C. Use exclusive upper limits. With exclusive upper limits, a value at a shared boundary belongs to the next interval.
A grouped distribution ends with “80 and above.” What is its limitation?
A Its frequency must be zero
B It cannot be exhaustive
C It is a qualitative class
D Its width cannot be determined
Answer: D. Its width cannot be determined. The open-ended upper interval has no stated endpoint, so its width is unknown.
Class frequencies add to 96 but the sample has 100 units. What is the likely issue?
A Four units are unclassified
B Class marks are too large
C The width equals the frequency
D The dataset has no population
Answer: A. Four units are unclassified. The frequency total is four short, suggesting omitted or unclassified observations.
A survey has 120 entries, 24 missing. What percentage is missing?
A 24%
B 20%
C 80%
D 12%
Answer: B. 20%. Twenty-four divided by 120 equals 20%.
A frequency table has 90 observations. The first class has 20 and second has 25. What is the second cumulative count?
A 25
B 20
C 45
D 70
Answer: C. 45. Cumulative frequency through the second class is 20 plus 25, or 45.
Using exclusive upper limits, which intervals are equal in width?
A 0–5, 5–20, 20–30
B 0–10, 10–25, 25–30
C 0–15, 10–20, 20–30
D 0–10, 10–20, 20–30
Answer: D. 0–10, 10–20, 20–30. Each listed interval spans 10 units, using a consistent exclusive-boundary convention.
A category includes values from 10 up to but not including 20. Which notation fits?
A 10–20 exclusive
B 10–20 inclusive
C 10 and above
D Below 10 only
Answer: A. 10–20 exclusive. Exclusive notation includes the lower limit and excludes the upper limit.
What is the midpoint of a class with boundaries 9.5 and 19.5?
A 9.5
B 14.5
C 19.5
D 29
Answer: B. 14.5. The midpoint is the average of 9.5 and 19.5, which is 14.5.
A class share equals 0.4. What is its percentage?
A 4%
B 0.4%
C 40%
D 60%
Answer: C. 40%. Multiply the relative frequency 0.4 by 100 to obtain 40%.
A dataset uses categories that omit self-employed workers. What principle is violated?
A Equal class width
B Chronological order
C Cumulative frequency
D Exhaustiveness
Answer: D. Exhaustiveness. An exhaustive classification must provide a suitable category for every eligible unit.
A class boundary is 19.5 between whole-number classes. Which classes meet there?
A 10–19 and 20–29
B 10–20 and 20–30 inclusive
C 0–19 and 21–30
D 19–20 and 20–21
Answer: A. 10–19 and 20–29. The continuous boundary 19.5 separates whole-number classes 10–19 and 20–29.
A dataset contains every individual value and no intervals. How is it presented?
A Cumulative data
B Ungrouped data
C Geographical data
D Open-ended data
Answer: B. Ungrouped data. An ungrouped presentation lists individual observations rather than class summaries.
Why should class widths be reported clearly?
A They determine survey consent
B They replace sample frequencies
C They affect distribution interpretation
D They show population location
Answer: C. They affect distribution interpretation. Class widths affect how the grouped distribution is read and compared.
A class frequency is 16 of 80. What is its relative frequency?
A 16%
B 64%
C 80%
D 20%
Answer: D. 20%. Sixteen divided by 80 equals 0.20, or 20%.
A less-than cumulative frequency is 35 at the end of class two. What is counted?
A All observations through class two
B Only observations in class two
C All observations above class two
D The number of class intervals
Answer: A. All observations through class two. Less-than cumulative frequency includes the first and second class observations up to that boundary.
Two categories share the value 50. What problem can result?
A The total frequency must fall
B The value may be double-counted
C The class midpoint disappears
D All observations become continuous
Answer: B. The value may be double-counted. Overlapping categories can cause an observation to be assigned more than once.
What should be checked after building a frequency distribution?
A All class frequencies are equal
B Every class has zero values
C Frequencies sum to dataset size
D The midpoint equals the total
Answer: C. Frequencies sum to dataset size. The frequencies should reconcile with the number of observations classified.
Why might unequal intervals be used?
A They guarantee equal class counts
B They remove class boundaries
C They make every variable qualitative
D Some ranges contain more data
Answer: D. Some ranges contain more data. Unequal widths may help summarise ranges with different data density, but they require careful interpretation.