Process Equipment Design – Short Notes | Chemical Engineering

Design basis

  • Equipment design begins with process duty, capacity, operating pressure, temperature, phases and composition.
  • Normal, start-up, shutdown, upset and cleaning cases can create different requirements.

Process sizing

  • Thermal, hydraulic, mass-transfer or reaction calculations establish the equipment’s process dimensions.
  • Capacity, residence time, heat-transfer area, pressure drop and separation performance are key outputs.

Mechanical design

  • Mechanical design checks pressure, vacuum, external loads, thermal expansion and support conditions.
  • Wall thickness, heads, flanges, nozzles and supports follow the applicable design basis and code requirements.

Materials and corrosion

  • Material selection considers fluid compatibility, corrosion, erosion, temperature and fabrication.
  • Corrosion allowance, lining, cladding or material change may be considered where appropriate.

Vessels and columns

  • Vessels contain or separate process fluids; columns provide contacting stages or packing for separation.
  • Internal components, nozzles, supports and access affect flow distribution and maintenance.

Heat-transfer equipment

  • Heat exchangers, condensers and reboilers are sized for duty, temperatures, flow arrangement and allowable pressure drop.
  • Fouling, cleaning access, vibration and thermal expansion influence exchanger details.

Process and mechanical design checks

CheckProcess design focusMechanical design focus
Heat exchangerDuty and outlet temperaturesPressure boundary and thermal expansion
ColumnCapacity and separationShell, internals and support loads
Pressure vesselVolume and residence timeWall, heads, nozzles, supports
PumpFlow and headCasing, shaft, seals, materials

Fabrication and inspection

  • Welding, forming, heat treatment and inspection affect final equipment integrity.
  • Inspection plans and test requirements should be tied to material, service and design basis.

Operation and reliability

  • Instrumentation, relief connections, drains, vents and isolation support safe operation and maintenance.
  • Equipment performance is verified against the specified process and mechanical requirements.