Heat-transfer modes
- Conduction transfers energy through molecular interactions or within solids.
- Convection combines fluid motion with heat exchange at a surface; radiation transfers energy by electromagnetic emission.
Conduction
- Fourier’s law relates heat flux to thermal conductivity and temperature gradient.
- Thermal-resistance networks simplify layered walls, cylinders and composite surfaces.
Convection
- Convective heat transfer depends on fluid properties, geometry, flow regime and surface condition.
- Dimensionless correlations use Nusselt, Reynolds and Prandtl numbers within defined ranges.
Radiation
- Thermal radiation depends on surface temperature, emissivity and surrounding geometry.
- Radiation can be important at high temperature or across surfaces separated by a gas gap.
Phase change
- Boiling and condensation involve latent heat and interfacial transport.
- Heat-transfer coefficients depend on phase regime, surface conditions and operating pressure.
Heat exchangers
- Heat exchangers transfer energy between process streams separated by a surface or direct contact.
- Shell-and-tube, double-pipe and plate designs differ in flow arrangement, area and maintenance.
Heat-transfer modes
| Mode | Driving factor | Process example |
|---|---|---|
| Conduction | Temperature gradient in material | Heat through exchanger wall |
| Convection | Surface-to-fluid temperature difference and flow | Tube-side heat transfer |
| Radiation | Temperature and surface emissivity | High-temperature furnace |
| Phase change | Sensible and latent heat transfer | Boiler or condenser |
Sizing methods
- LMTD methods use terminal temperature differences for specified flow arrangements.
- Effectiveness–NTU methods relate exchanger performance to heat-capacity rates and area when outlet temperatures are unknown.
Operation and fouling
- Fouling adds thermal resistance and can increase pressure drop over time.
- Monitoring approach temperatures, duty, pressure drop and cleaning history supports reliable operation.