Fluid properties
- Density, viscosity, pressure and compressibility characterize fluid behavior.
- Newtonian fluids have shear stress proportional to the velocity gradient under the model assumptions.
Hydrostatics
- Pressure in a static fluid varies with elevation under gravity.
- Manometers and pressure taps measure pressure differences using fluid-column balance.
Flow regimes
- Reynolds number compares inertial and viscous effects in a flow.
- Laminar, transitional and turbulent regimes have different velocity profiles and friction behavior.
Continuity and momentum
- Mass conservation relates flow rate, density and area across a control volume.
- Momentum balances connect forces, pressure and changes in fluid momentum.
Bernoulli and energy loss
- Bernoulli’s equation relates pressure, velocity and elevation for idealized flow.
- Real piping requires loss terms for friction, fittings, valves and equipment.
Pipe flow and networks
- Pressure drop depends on flow rate, pipe size, roughness, length and fluid properties.
- Series and parallel branches share flow and pressure constraints according to network balance.
Common flow calculations
| Calculation | Core relation or method | Use |
|---|---|---|
| Continuity | Mass flow conserved | Area and velocity sizing |
| Bernoulli with losses | Pressure, velocity, elevation plus loss terms | Pipe system energy |
| Reynolds number | ρVD / μ | Flow regime indication |
| Pump duty | Flow rate and required head | Pump selection |
Pumps and flow measurement
- Pumps add mechanical energy to move liquid through process systems.
- Orifice plates, venturi meters, rotameters and other devices infer flow from measured responses.
Multiphase and mixing
- Packed and fluidized beds, agitation and non-Newtonian flows require models suited to their geometry and phases.
- Scale-up compares relevant dimensionless groups and operating regimes.