Units and process variables
- Use consistent units for mass, amount, pressure, temperature, volume and energy.
- Process variables include flow rate, composition, conversion, yield, selectivity and concentration.
Flow diagrams and basis
- A process flow diagram identifies units, streams and the direction of material and energy flow.
- Selecting a calculation basis, such as a batch amount or flow rate, simplifies unknown quantities.
Material balances
- A general balance is accumulation = input − output + generation − consumption.
- For steady nonreacting systems without accumulation, total and component inputs equal their outputs.
Composition and stoichiometry
- Mass fraction, mole fraction and concentration describe mixture composition in different forms.
- Balanced reaction equations relate reactant and product amounts through stoichiometric coefficients.
Conversion, yield and selectivity
- Conversion measures the fraction of a reactant consumed; yield measures desired product formed relative to a defined basis.
- Selectivity compares desired product formation with competing product formation.
Recycle, bypass and purge
- Recycle returns part of a process stream to an earlier unit; bypass diverts material around a unit.
- Purge removes part of a recycle loop to prevent accumulation of inert or unwanted components.
Material and energy balance focus
| Balance | Tracks | Typical process use |
|---|---|---|
| Total material | Overall mass or molar flow | Stream closure |
| Component material | A species or conserved element | Composition and reaction calculations |
| Energy | Enthalpy, heat, work and energy flows | Heaters, coolers, reactors |
| Transient balance | Accumulation with time | Filling, draining and batch operations |
Energy balances
- An energy balance accounts for heat, work, enthalpy flow and changes in kinetic or potential energy.
- Reference states must be used consistently when calculating enthalpy changes.
Calculation checks
- Degrees of freedom compare independent unknowns with independent equations and specifications.
- Check dimensions, limiting cases, stream closure and numerical consistency before using results.