Orthographic projection represents an object using what?
A A single photograph
B Related 2D views
C A shaded perspective
D A contour map
Answer: B. Related 2D views. Orthographic drawings use aligned views such as plan, elevation and section.
In first-angle projection, the object lies between observer and what?
A North arrow
B Drawing sheet
C Projection plane
D Title block
Answer: C. Projection plane. First-angle projection places the object between the observer and projection plane.
In third-angle projection, which lies between observer and object?
A Projection plane
B A north arrow
C A section line
D A dimension string
Answer: A. Projection plane. Third-angle projection places the projection plane between observer and object.
An isometric view shows three principal axes with what appearance?
A Equal projected foreshortening
B One-point convergence
C Only two dimensions
D A horizontal cut
Answer: A. Equal projected foreshortening. Isometric projection uses equal foreshortening along three mutually separated axes.
A perspective drawing is useful for communicating what?
A Exact hidden dimensions only
B Soil bearing capacity
C Sewer gradient
D Visual appearance
Answer: D. Visual appearance. Perspective views help communicate how a space or building may visually appear.
An auxiliary view is used to show true shape of what?
A Inclined surface
B Horizontal floor only
C A hidden pipe
D A north arrow
Answer: A. Inclined surface. Auxiliary projection views a surface perpendicular to its plane to reveal true shape.
A section hatch identifies what?
A A dimension value
B Material cut by section
C A compass direction
D A door swing
Answer: B. Material cut by section. Hatching distinguishes materials or components intersected by the cutting plane.
An extension line projects a dimension reference from what?
A Drawing title
B North arrow
C Feature being measured
D Scale bar only
Answer: C. Feature being measured. Extension lines connect the measured feature to the dimension line.
A centre line is commonly drawn as what?
A Solid heavy line only
B Random dots
C Long-short repeating pattern
D Solid thin outline
Answer: C. Long-short repeating pattern. Centre lines use a repeating long-short convention to indicate axes or symmetry.
A hidden line convention commonly uses what pattern?
A Thick zigzags
B Short dashes
C Double arrows
D Filled circles
Answer: B. Short dashes. Hidden edges are commonly represented by short evenly spaced dashes.
A floor finish plan identifies what?
A Only column loads
B Water-source chemistry
C Site north direction
D Surface finish locations
Answer: D. Surface finish locations. Finish plans identify floor materials and boundaries across rooms.
A door schedule coordinates marks with size and what?
A Soil permeability
B Traffic volume
C Slab load only
D Type or specification
Answer: D. Type or specification. Schedules link drawing marks to door types, dimensions and relevant specifications.
A building section cut line on plan includes what?
A View direction markers
B Room-area totals
C Contour elevations only
D Window glass type
Answer: A. View direction markers. Section markers identify where the cut occurs and the direction of view.
A detail drawing provides what compared with a general plan?
A Less precise geography
B Only room names
C A wider site boundary
D Larger-scale construction information
Answer: D. Larger-scale construction information. Details enlarge a junction or component to show its construction clearly.
A bar scale remains useful if a drawing is what?
A Recolored
B Resized proportionally
C Rotated only
D Printed without ink
Answer: B. Resized proportionally. A graphic scale changes with the drawing image and remains readable after proportional resizing.
A scale of 1:100 means one drawing unit equals how many real units?
A One hundred
B Ten
C Fifty
D One thousand
Answer: A. One hundred. At 1:100, every unit on the drawing represents 100 of the same units in reality.
A plan dimension should normally be read from what?
A Dimension figures
B Screen pixel count
C Wall line thickness
D Furniture symbol size
Answer: A. Dimension figures. Dimension figures provide the intended measurement rather than measuring the drawing by eye.
A site grading plan communicates what?
A Door swing arcs
B Window schedules
C Proposed ground levels
D Interior furniture
Answer: C. Proposed ground levels. Grading plans show existing and proposed elevations and surface drainage intent.
A setting-out plan helps locate what on site?
A Interior paint tones
B Lighting color temperature
C Building axes and corners
D Sewer bacteria
Answer: C. Building axes and corners. Setting-out drawings transfer building geometry and reference points to the construction site.
A reflected ceiling plan is generally viewed from which direction?
A Looking downward from roof
B Through a foundation
C Along the street
D Looking upward from below
Answer: D. Looking upward from below. The plan is imagined as a reflected view of ceiling features seen from the room below.
A plumbing layout coordinates fixtures with what?
A Road gradients
B Column grids only
C Supply and drainage pipes
D Roof shingles
Answer: C. Supply and drainage pipes. Plumbing drawings show fixtures and their water-supply and drainage connections.
An electrical layout coordinates lights, outlets and what?
A Contour intervals
B Switches
C Foundation soil
D Road signs
Answer: B. Switches. Electrical plans locate lighting points, outlets, switches and related electrical devices.
An accessible route should provide what?
A Usable continuous movement
B Stairs only
C Blocked turning areas
D Abrupt level barriers
Answer: A. Usable continuous movement. Accessible planning supports continuous movement for users with varied mobility needs.
A building setback is measured from a building to what?
A Room centreline
B Plot boundary or control line
C Ceiling level
D Window sill
Answer: B. Plot boundary or control line. Setbacks are clear distances from a property line or prescribed site control line.
A schedule mark on a plan links an element to what?
A North direction
B Section hatch only
C Drawing sheet border
D Detailed schedule entry
Answer: D. Detailed schedule entry. Marks connect plan symbols with a coordinated schedule of sizes or specifications.