Difficulty: Easy & Basic
What is the primary role of a vehicle chassis?
A Cooling engine coolant
B Storing fuel pressure
C Measuring road speed
D Supporting vehicle loads
Answer: D. Supporting vehicle loads. The chassis supports major vehicle assemblies and carries operating loads.
Which group conveys engine power toward the wheels?
A Body trim
B Powertrain
C Lighting circuit
D Climate control
Answer: B. Powertrain. The powertrain includes the engine and components that transmit drive to the wheels.
During a turn, why does a differential matter?
A It locks both wheels always
B It changes steering ratio
C It allows unequal wheel speeds
D It cools the axle oil
Answer: C. It allows unequal wheel speeds. Inner and outer driven wheels travel different distances, so their speeds differ.
What does wheelbase measure?
A Width between front tires
B Height above the road
C Distance between axle centers
D Length of the engine
Answer: C. Distance between axle centers. Wheelbase is the longitudinal distance between the front and rear axle centers.
Which system changes a vehicle’s direction?
A Exhaust system
B Cooling system
C Steering system
D Fuel system
Answer: C. Steering system. The steering system directs the road wheels as the driver turns.
Which part mainly supports load elastically?
A Brake disc
B Fuel filter
C Spring
D Propeller shaft
Answer: C. Spring. Suspension springs carry load and deflect over road irregularities.
Which component controls spring oscillation?
A Clutch
B Damper
C Radiator
D Differential
Answer: B. Damper. A damper dissipates suspension motion and limits repeated bouncing.
Why is a clutch used in a manual powertrain?
A To cool the gearbox
B To interrupt engine drive
C To steer front wheels
D To charge the battery
Answer: B. To interrupt engine drive. Disengaging the clutch temporarily interrupts torque for starting or gear changes.
Where are engine exhaust gases routed?
A Lubrication circuit
B Cooling jacket
C Intake manifold
D Exhaust system
Answer: D. Exhaust system. The exhaust system carries combustion products away from the engine.
What does an odometer record?
A Distance travelled
B Engine temperature
C Fuel pressure
D Wheel alignment
Answer: A. Distance travelled. An odometer accumulates the distance covered by the vehicle.
Which instrument displays engine rotational speed?
A Tachometer
B Speedometer
C Odometer
D Fuel gauge
Answer: A. Tachometer. A tachometer indicates engine speed, commonly in revolutions per minute.
Which vehicle type is designed mainly to carry freight?
A Touring motorcycle
B Goods vehicle
C Passenger sedan
D Sports coupe
Answer: B. Goods vehicle. Trucks and other goods vehicles are designed to transport cargo.
What does curb mass generally describe?
A Maximum trailer mass
B Cargo capacity only
C Engine mass only
D Ready-to-drive vehicle mass
Answer: D. Ready-to-drive vehicle mass. Curb mass includes standard equipment and operating fluids but excludes occupants and payload.
Which layout drives the front wheels?
A Front-wheel drive
B Rear-wheel drive
C Part-time four-wheel drive
D Rear-engine drive
Answer: A. Front-wheel drive. In front-wheel drive, engine torque is delivered to the front wheels.
Which arrangement can drive all four wheels?
A Front-wheel drive
B Rear-wheel drive
C Single-wheel drive
D Four-wheel drive
Answer: D. Four-wheel drive. A four-wheel-drive system can transmit drive to both axles.
What is ground clearance?
A Distance between axles
B Width across mirrors
C Height of roof rails
D Lowest underbody height
Answer: D. Lowest underbody height. Ground clearance is measured from the road to the vehicle’s lowest relevant underbody point.
Which component forms the vehicle’s road-contact surface?
A Wheel hub
B Tire
C Brake caliper
D Axle housing
Answer: B. Tire. The tire is the compliant interface between the wheel assembly and road.
What does payload capacity represent?
A Vehicle mass without load
B Maximum engine speed
C Fuel tank volume
D Passengers and cargo carried
Answer: D. Passengers and cargo carried. Payload is the load carried, including occupants and cargo, subject to vehicle limits.
Which system removes excess engine heat?
A Steering system
B Charging system
C Cooling system
D Exhaust manifold
Answer: C. Cooling system. The cooling system controls engine temperature by rejecting excess heat.
What supplies current for engine starting?
A Battery
B Alternator pulley
C Fuel injector
D Radiator fan
Answer: A. Battery. The battery supplies electrical energy to the starter during cranking.
Which machine converts fuel energy into shaft work?
A Engine
B Differential
C Clutch
D Final drive
Answer: A. Engine. An internal-combustion engine converts chemical energy into mechanical output.
In a conventional rear-wheel-drive car, which axle is driven?
A Rear axle
B Front axle
C Steering column
D Non-driven hub
Answer: A. Rear axle. The rear axle receives torque from the transmission and final drive.
What is a vehicle body shell mainly designed to provide?
A Gear reduction only
B Fuel filtration
C Occupant enclosure and structure
D Brake pressure storage
Answer: C. Occupant enclosure and structure. The body encloses occupants and contributes to structural support and aerodynamic shape.
Which device helps reduce exhaust pollutants chemically?
A Air cleaner
B Catalytic converter
C Oil pump
D Silencer only
Answer: B. Catalytic converter. A catalytic converter promotes reactions that reduce selected harmful exhaust emissions.
How do disc-brake pads slow a rotating wheel?
A Magnetic attraction
B Coolant pressure
C Tire tread expansion
D Friction against the disc
Answer: D. Friction against the disc. Pads press against the rotating disc and create frictional braking torque.