Science · Physics
Alternating Current
Concepts, equations and quick revision
Introduction
Alternating current (AC) periodically reverses direction. AC circuit behaviour depends on resistance, inductance and capacitance, which can make voltage and current differ in phase.
Alternating current (AC) periodically reverses direction. AC circuit behaviour depends on resistance, inductance and capacitance, which can make voltage and current differ in phase.
1. AC Waveforms and RMS Values
- Sinusoidal source. A sinusoidal voltage can be written v(t) = V₀ sin(ωt + φ); the current can have a different phase.
- Frequency and period. The period is T = 1/f and angular frequency is ω = 2πf.
- RMS value. For a sinusoid, Vᵣₘₛ = V₀/√2 and Iᵣₘₛ = I₀/√2; RMS values give the equivalent heating effect in a resistor.
2. Resistors, Inductors and Capacitors
- Resistor. In a pure resistor, current and voltage are in phase.
- Inductor. In an ideal inductor, current lags voltage; inductive reactance increases with frequency.
- Capacitor. In an ideal capacitor, current leads voltage; capacitive reactance decreases with frequency.
3. Impedance, Resonance and Power
- Impedance. Impedance combines resistance and reactance and determines current magnitude in an AC circuit.
- Series RLC circuit. For a series RLC circuit, Z = √(R² + (Xᴸ − Xᶜ)²); at resonance, the reactances are equal.
- Average power. For sinusoidal voltage and current, Pₐᵥₑ = VᵣₘₛIᵣₘₛ cos φ; cos φ is the power factor.
4. Transformers and Power Systems
- Transformer action. A changing current in the primary produces changing magnetic flux, inducing voltage in the secondary.
- Ideal turns relation. Vₛ/Vₚ = Nₛ/Nₚ; an ideal step-up transformer raises voltage while lowering current for the same power.
- Transmission. High-voltage transmission reduces current for a given power and can reduce resistive line losses.
Quick Revision
| Concept | Key relation |
|---|---|
| Sinusoidal RMS voltage | Vᵣₘₛ = V₀/√2 |
| Series RLC impedance | Z = √(R² + (Xᴸ − Xᶜ)²) |
| Average AC power | P = VᵣₘₛIᵣₘₛ cos φ |
| Ideal transformer | Vₛ/Vₚ = Nₛ/Nₚ |
Conclusion
AC analysis needs both magnitude and phase. Use RMS values for sinusoidal power calculations and identify whether resistance, inductance or capacitance dominates.
AC analysis needs both magnitude and phase. Use RMS values for sinusoidal power calculations and identify whether resistance, inductance or capacitance dominates.