1. Workability concrete is directly proportional to (A) aggregate cement ratio (B) time of transit (C) grading of the aggregate (D) all of the above 2. Approximate value of shrinkage strain n concrete is (A) 0.03 (B) 0.003 (C) 0.0003 (D) 0.00003 3. The percentage of voids in cement is approximately (A) 25% (B) 40% (C) 60% (D) 80% 4. 1% of boyds voids […]
Blog
Civil Engineering MCQ
Civil Engineering MCQ
1. Which of the following methods of structural analysis is a force method? (A) Slope deflection method. (B) Column analogy method. (C) Moment distribution method. (D) None of the above. 2. The construction joints in buildings are provided after (A) 10 m. (B) 15 m. (C) 20 m. (D) 40 m. 3. The pile which […]
Electrical Engineering Interview Questions and Answers
If one lamp connects between two phases it will glow or not? What happens if a capacitor is connected to a generator load? What is stepper motor. What are its uses? Battery banks are in connected in series or parallel and why? How to determine alternating current frequency? In a Tap changing transformer, tap is […]
IQ Test – 1
1. If 11 * 11 = 4 22 * 22 = 16 33 * 33 = 36 then 44 * 44 = ? Answer = 64 Explaination: (1 + 1) * (1 + 1) = 4 (2 + 2) * (2 + 2) = 16 (3 + 3) * (3 + 3) = 36 (4 […]
Electrical Engineering Interview Questions and Answers
1. What is an isolation transformer? 2. Why we don’t use wood as the core for transformers? 3. Why are alternators put in parallel? 4. What do you mean by Switchgear? 5. What do you mean by synchronising of alternator? 6. What is through fault in power system? 7. What is difference between symmetrical and […]